ES03-WiFi

2.4Ghz Wi-Fi remote computer power switch

■ Turn on/off your computer via smartphone

■ 2.4GHz WiFi module adapter powered by internal USB standby power

■ Works anywhere when connected to the internet between ES03-WiFi and Smartphone

■ Use smartphone to turn on/off PC instantly, reset, force shut down, schedule on/off, or group on/off.

■ Display power on/off status of your PC on your smartphone

■ Includes power / reset / Speaker cable (Speaker wire is used to determine on/off status)

Turn on/off your computer via smartphone
2.4GHz WiFi module adapter powered by internal USB standby power
Use smartphone to turn on/off PC instantly, reset, force shut down, schedule on/off, or group on/off
 

SPECIFICATIONS

Model No. SST-ES03-Wifi
Module adapter card
Adapter form factor Internal USB 2.0 9 pin
WiFi Standard IEEE 802.11b/g/n
Security 64/128 bit WEP, TKIP, AES, WPA, WPA2
Frequency Range 2.412GHz - 2.484GHz
RF output power 802.11b: 20±2dBm (@11Mbps)
802.11g: 17±2dBm (@54Mbps)
802.11n: 14±2dBm (@HT20, MCS7)
Receiver Sensitivity 802.11b: -91dBm (@11Mbps, CCK)
802.11g: -75dBm (@54Mbps, OFDM)
802.11n: -72dBm (MCS7)
Antenna type Chip antenna
IPEX connector (for optional external antenna)
Environment Operating temperature: -40℃~70℃ (-40℉~158℉)
Storage temperature: 0℃~40℃ (32℉~104℉)
Operating humidity : 0%~90% non-condensing
Storage humidity : 10%~90% non-condensing
Net weight 4.7g
Dimension 25.2mm (W) x 8mm (H) x 45.6mm (D)
0.99" (W) x 0.31" (H) x 1.8" (D)
 




  • DOWNLOADS
  • RECOMMENDATIONS
  • PRODUCT REVIEWS
  • Q&A


Describe Ver Size Download
ES03-WiFi manual V1.0 1,110 KB
eWeLink APP (Apple)
eWeLink APP (Android)
ES03-WIFI High resolution photos 3,381 KB
ES03-WIFI Product Sheet V1.0 243 KB


There are no recommend items for this product.
When the PC is turned on, the SPEAKER “+” signal outputs +5V, this is how ES03-WIFI determines if your PC is on or not. So we recommend that you choose a motherboard with standard PC speaker header. If you have no other choice and is technically inclined, you may connect to other signal output pins on the motherboard that are between +3.3V ~ +5V when PC is turned on, and no signal voltage output from the signal pin when the PC is turned off.
If the signal pin header is different from the included SPEAKER cable, only insert the signal pin. (+5V, GND pin is empty)