INTRODUCTION
SPECIFICATIONS
Download
• Home
• Accessories
• Cables

 

BUY NOW

G11313530-RT

￭ Supports USB 3.1 Gen 2 standard for 10 Gb/s SuperSpeed transfer

￭ Supports USB Type-C reversible connector insertion

￭ Supports most SilverStone chassis (Complete list in specifications)

￭ Flexible flat cables have much greater flexibility to allow for tighter folding

New generation, new speed

Upgrade kit provides speedy transfer rate up to 10 Gbps

Handy connector insertion

USB Type-C makes connecting to new devices easier than ever

Upgrade your SilverStone chassis to Type-C

Complete list in specifications

Flat cables

Flat internal cables allow tighter folding and easier cable management

USB Type- A + USB Type-C + Audio + MIC

Both USB internal cables connected to motherboard

USB 3.1 Gen 2 internal 20pin (Key A connector)

USB 3.1 Gen 2 Type-C cable: 600mm

USB 3.0 internal 19pin connector

USB 3.1 Gen 2 internal 20pin (Key A) connected to motherboard

 

SPECIFICATIONS

Model No.	G11313530-RT
Ports	Type-A + Type-C + Audio + MIC
Connectors	USB internal 20pin (Key A), USB internal 19pin, Audio
Interface	Type-A: USB 3.0, Type-C: USB 3.1 Gen 2 (10 Gb/s)*, backwards compatible with USB 3.0
Cable length	USB 3.0 cable: 800mm USB 3.1 Gen 2 Type-C cable: 600mm Audio cable: 800mm
Support list	CS380, CS381, DS380 FT03, FT03-MINI, FT04, FTZ01, FTZ01-E GD04, GD05, GD06, GD07, GD08 KL04 LD03 ML03, ML04, ML07 PS08, PS09, PS10, PS12, PS14 RL04, RL05 RV04, RVZ01, RVZ01-E, RVZ03 SG05, SG05-Lite, SG07, SG08, SG08-LITE, SG11, SG13 TJ04-E Only long enough for connecting to PCIe slots (ECU02), not long enough for motherboard FT02, RV02 Cable not long enough FT05, RV03, RV05 Same I/O cutout, but not compatible GD09, GD10, PS07, PS14-E, PS15, PS16, SG09, SG10, SG12, TJ08-E
Dimension	75mm (W) x 28mm (H) x 13mm (D) 2.95" (W) x 1.1" (H) x 0.51" (D)

Remark :

* According to USB 3.1 standard, to achieve USB 3.1 Gen2 speed, the combined external and internal cable length cannot exceed 1000mm. Since G11313530-RT’s internal Type C cable is already 600mm, the external connector must be less than 400mm to maintain full speed.

 

• DOWNLOADS
• RECOMMENDATIONS
• PRODUCT REVIEWS
• Q&A

Describe	Ver	Size	Download
G11313530-RT High resolution photos		1,420 KB
G11313530-RT Product Sheet	V1.0	320 KB

ECU02 PCI Express card with USB 3.1 Gen2 internal 20 pin connector more... ECU04-E USB 3.1 PCI Express card with internal 19pin connector more... TS11-C USB 3.1 Type-C 2.5" & 3.5" SATA drive docking station more... TS231U-C Dual-Bay 3.5" RAID enclosure with USB 3.1 Type-C more... TS12 USB 3.1 Gen 2 Type-C docking station with offline clone and JBOD mode for dual 2.5" or 3.5" SATA drives more...

No such information.