■ Latest USB 3.1 Gen 2 interface up to 10Gb/s super speed transfer rate

■ Support various lengths of M.2 SSD (22x42mm,22x60mm,22x80mm)

■ Supports TRIM to the SSD

■ Supports PCI Express Rev 3.1a

■ Supports NVM Express 1.3

■ Supports USB Attached SCSI Protocol(UASP) Specification Rev. 4

■ Aluminum alloy case and built-in thermal pad

■ No driver installation required

Mobile Storage Series
10Gb/s SuperSpeed USB 3.1 Type-C to NVMe M.2 SSD enclosure
Support various lengths of M.2 SSD
22 x 42mm 22 x 60mm 22 x 80mm
10Gb/s Super speed transfer rate
MS11 is an USB 3.1 Gen2 Type-C enclosure made for NVMe M.2 solid state drives that is capable of reaching up to 10Gb/s of transfer rate.
Aluminum alloy case with thermal pad
MS11 is designed to effectively cool high performance M.2 NVMe SSD, even during prolonged burning sessions of 4+ hours, the MS11 can keep installed SSD running at maximum speed and stability
High performance cable included
MS11 includes a high quality Type-C to Type-A cable with Type-C adapter to ensure maximum performance and compatibility

There are three types of M.2 SSDs, please make sure you know the difference between them before pairing these with your SilverStone product.

SATA (B key)
Used for SATA SSDs, and interfaced through the AHCI driver and SATA 3.0 (6 Gbit/s) port exposed through the M.2 connector.

PCI Express using AHCI (M key)
Used for PCI Express SSDs and interfaced through the AHCI driver and provided PCI Express lanes, providing backward compatibility with widespread SATA support in operating systems at the cost of not delivering optimal performance by using AHCI for accessing PCI Express SSDs.

PCI Express using NVMe (M key) only support to install this type
Used for PCI Express SSDs and interfaced through the NVMe driver and provided PCI Express lanes, as a high-performance and scalable host controller interface designed and optimized especially for interfacing with PCI Express SSDs. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and complementing the parallelism of contemporary CPUs, platforms and applications.



Model No.
Color Charcoal
Material Aluminum
Application USB 3.1 Type-C NVMe M.2 SSD enclosure
Controller JMicron JMS583
Transfer interface 10Gb/s USB 3.1 Type-C
LED indicator Solid Blue: Powered
Blinking Blue: Reading / writing
Drive interface support PCIe Gen3 x 2
USB Cable length 300mm
Net weight 53g
Dimension 107 mm (W) x 10.9 mm (H) x 32.4 mm (D)
4.21" (W) x 0.43" (H) x 1.28" (D)
Thermal Pad
Thermal conductivity 1.5W/m.k
Operating Temp. -40°C ~ 220°C
Thermal pad thickness 0.5mm, 1.5mm
Net Weight and dimension Blue thermal pad 1:60 mm (W) x 0.5 mm (H) x 20mm (D), 1.4g
Blue thermal pad 2:60 mm (W) x 1.5 mm (H) x 20mm (D), 4.2g


  • Q&A

Describe Ver Size Download
MS11 manual V1.0 1,577 KB
MS11 High resolution photos 2,613 KB
MS11 eDM (ms11-en.pdf)   390 KB

There are no recommend items for this product.

No such information.