ES02-PCIE
￭ Control your computer from anywhere in the room using 2.4GHz RF remote
￭ 2.4GHz receiver PCIe card included
￭ Works as far away as twenty meter
￭ Includes power / reset switch Y cable
￭ Includes optional low profile expansion slot cover
￭ Integrated PC speaker on receiver assist in providing auditory feedback while in use
SPECIFICATIONS
| Model No. | SST-ES02-PCIe |
| Adapter card | |
| Adapter form factor | Low profile PCIe x1 |
| Operation frequency | 2.4GHz |
| EIRP | 3.76dBm (Measured max.) |
| Operating range | 20 meter (Free space) |
| Environment | Operating temperature: 0°C ~ 40°C (32°F ~ 104°F) Storage temperature: -40°C ~ 70°C (-40°F ~ 158°F) Operating humidity: 10% ~ 90% non-condensing Storage humidity: 5% ~ 90% non-condensing |
| Net Weight | 29.6g |
| Dimension | 120mm (W) x 21mm (H) x 68mm (D) 4.72" (W) x 0.83" (H) x 2.68" (D) |
| Remote control | |
| Operation frequency | 2.4GHz |
| EIRP | 3.76dBm (Measured max) |
| Operating range | 20 meter (Free space) |
| Battery type | CR2032 (Lithium manganese button battery) |
| Nominal voltage | DC 3.0V |
| Battery environment | Operating temperature: -20°C ~ 70°C (-4°F ~ 158°F) Storage temperature: 10°C ~ 40°C (50°F ~ 104°F) |
PICTURES
- DOWNLOADS
- RECOMMENDATIONS
- PRODUCT REVIEWS
- Q&A
| Describe | Ver | Size | Download |
 ES02-PCIe manual |
V1.0 | 458 KB |  |
| ES02-PCIE High resolution photos |
7,844 KB | |
|
|
ES02-PCIE eDM (es02-pcie-edm-en.pdf)
|
576 KB |
|
|
|
1. Why can’t I turn on the computer by pressing the power button?
Please check if the LED indicator blinks when pressing the Power or Reset button, if it doesn’t blink, then you should change the battery.
If it blinks, but still can’t turn on the computer, please try the following steps:
- Unplug the computer’s power cord, pull and insert the card several times and check if the expansion slot is dirty. Use an eraser to clean the gold fingers (connector’s metal pins), then re‐insert the card.
- Check if the POWER SW and RESET SW are connected in the correct position, be sure they are not loose.
2. Both LED indicators on the switch and the card both lit up, why doesn’t my computer turn on when I Press the button?
Step 1 : Re‐sync the switch and the card.
Step 2 : Press any button on the remote until the indicator light turns off on the ES02-PCIe adapter.
Step 1 : Re‐sync the switch and the card.
Step 2 : Press any button on the remote until the indicator light turns off on the ES02-PCIe adapter.
3. How come I get no response when I press the remote control within the specified distance?
Please make sure USB standby function is turned on for the pin header the ES02-PCIe is connected to in the motherboard’s BIOS / UEFI setting. If your case is made of metal, the remote control distance will be affected. The affected distance will vary depending on material composition, thickness, and ES02-PCIe’s relative location inside the case.
4. How to turn off the ES02-PCIe’s integrated PC speaker?
he default configuration from the factory is set to have the PC speaker on so that users can discern if the receiver is responding to the remote. To turn off the integrated PC speaker on ES02-PCIe’s receiver, please move the jumper to the left side on pin 1 and 2.
5. How come I still get no response when I press the remote control button?
When pressing the remote control button, please make sure LED on the remote control is responding as well as it indicates if the remote control is sending signal.