￭ Includes three 140mm RGB LED fan guards with built-in RGB LED strips for advanced lighting effect
￭ Oversized front panel mesh design inspired by supercar intake grill
￭ Removable filters with positive air pressure design for dust reduction
￭ Built-in dual-mode LED light controller for adjusting colors and modes
￭ Super clean internal look with PSU and drive bay cover
￭ Includes 8 in 1 PWM fan hub for fan control and cable management
￭ Full tempered-glass side panel
      |
Primera is the Spanish word for “first” or “first class.” Cases in this series are designed for those seeking to build PCs with rich feature set and trend-setting aesthetics. The PM01-RGB is an incredible computer case that advances the original PM01 design, a case that was among the top performing cases released in 2016. It substitutes single color LEDs with RGB variants and has a full tempered-glass side panel to make PM01-RGB’s supercar inspired design feel even more luxurious and dazzling. Besides standard RGB light strips, the case includes SilverStone’s exclusive RGB fan guards that can change colors and lighting modes easily via LED control button on the top panel, or by compatible motherboard’s software utility. For those looking to get a case that can deliver cooling performance as good as it looks and want deeper personal customization, the PM01-RGB is it!
|
||
|
Single color mode：OFF > white > red > blue > green > light green > light blue > purple > single color breathing
Single color breathing mode：white > red > blue > green > light green > light blue > purple > gradient mode Gradient mode：breathing gradient > color gradient > OFF Sequence：OFF > single color mode > single color breathing mode > gradient mode > OFF Press for 3 sec to turn off light at any time, lightly press again to resume operation mode prior to turn off. RGB video demo |
| Model No. | SST-PM01B-RGB (black + RGB LED + tempered glass window) | |
| SST-PM01C-RGB (matte black + RGB LED + tempered glass window) | ||
| SST-PM01W-RGB (white + RGB LED + tempered glass window) | ||
| -- | ||
| Material | Plastic outer shell, steel body, tempered glass side panel | |
| Motherboard | ATX (up to 12" x 10.7"), Micro-ATX | |
| Drive bay | External | -- |
| -- | ||
| Internal | 2.5" or 3.5" x 4, 2.5" x 5 | |
| Cooling system | Front | 3 x 120mm / 140mm fan slot (includes 3 x 140mm fan + RGB LED fan guards) |
| Rear | 1 x 120mm / 140mm fan slot (includes 1 x 140mm fan) | |
| Side | -- | |
| Top | 3 x 120mm fan slot or 2 x 140mm fan slot | |
| Bottom | -- | |
| Internal | -- | |
| Radiator support | Front | 2 x 120mm ; 1 x 240mm / 280mm / 360mm |
| Rear | 1 x 120mm / 140mm | |
| Top | 2 x 120mm ; 1 x 240mm / 280mm / 360mm* | |
| Bottom | N/A | |
| Expansion slot | 7 | |
| Front I/O port | USB 2.0 x 2 USB 3.0 x 2 Audio x 1 MIC x 1 |
|
| Power supply | Standard PS2(ATX) | |
| Expansion card | Support graphics card up to 16.5" (419mm), width restriction - 6.88" (174mm) | |
| Limitation of CPU cooler | 180mm | |
| Limitation of PSU | 240mm | |
| Net weight | 10.1kg | |
| Dimension | 220mm (W) x 571mm (H) x 560mm (D), 70.3 Liters 8.66" (W) x 22.48" (H) x 22.05" (D), 70.3 Liters |
|
| Extra | Built-in RGB LED controller** | |
| Remark |
| * For 280mm radiators and fans, total thickness may not exceed 33mm depending on motherboard component clearance. ** For more details on RGB control, please refer to instruction manual. |
 PM01-RGB manual4,291 KB  PM01-RGB High resolution photos103,464 KB |
|
|
PM01-RGB eDM (pm01-rgb-en.pdf) 776 KB |
|
/ 
/ 
/ 
English 
Deutsch
Français
Italiano
Español
한국어
Русский
日本語
简体中文
/ 
/ 
正體中文(繁體)
ไทย
