LSB01
￭ Eight port RGB light strip connectors
￭ Includes two RGB LED light strips
￭ Built-in IC preset for directly changing colors
￭ Built-in magnetic strip and adhesive tape provide flexible install option
Remark
Single color mode：OFF > white > red > blue > green > light green > light blue > purple > single color breathing
Single color breathing mode：white > red > blue > green > light green > light blue > purple > gradient mode
Gradient mode：breathing gradient > color gradient > OFF
Sequence：OFF > single color mode > single color breathing mode > gradient mode > OFF
Press for 3 sec to turn off light at any time, lightly press again to resume operation mode prior to turn off.
Please refer to manual and carefully follow its installation steps to avoid incorrect connections and causing accidental damages.
| Motherboard RGB default mode description | |
|---|---|
| ASROCK | When RGB devices are connected without software, some models will display single color while others will default to multi-color animation display. |
| ASUS | When RGB devices are connected without software, they will default to multi-color demo mode. |
| BIOSTAR | When RGB devices are connected without software, they will default to blue color display. |
| Gigabyte | When RGB devices are connected without software, some models will display single color while others will default to multi-color animation display. |
| MSI | When RGB devices are connected without software, they will default to single color display. |
SPECIFICATIONS
| Model No. | SST-LSB01 |
| Material | Plastic outer shell |
| Included Parts | SST-LS02 RGB LED strip x 2 Extend Y cable x 2**** RGB 4pin signal cable x 1 4pin peripheral cable x 1 |
| Signal input | *Via RGB 4pin host (+12V, G, R, B**) or built-in IC control |
| Signal output | SilverStone custom RGB 4pin x 8*** |
| Output limitation (each port) | SST-LS02 (12V, 0.12A) x 5 or other identically spec’d RGB light strips |
| Net weight | 30g |
| Dimension | 46mm (W) x 19mm (H) x 85mm (D) 1.81" (W) x 0.75" (H) x 3.35" (D) |
| Remark : |
* Be sure to turn off power before switching signal input switch or install / remove LED strip
** Please check the signal source’s pin header that you want to connect is the same as LSB01’s pin definition.
*** Control box’s connectors are proprietary SilverStone custom connectors and are not compatible with other RGB strip’s 4pin connectors.
**** One to two Y cable can support SilverStone custom connectors and others RGB 4pin connectors. |
|
PICTURES
- DOWNLOADS
- RECOMMENDATIONS
- PRODUCT REVIEWS
- Q&A
| Describe | Ver | Size | Download |
 LSB01 manual |
V1.0 | 434 KB |  |
| LSB01 High resolution photos |
3,213 KB | |
|
|
LSB01 eDM (lsb01-en.pdf)
|
304 KB |
|
|
|
No such information.