SG13

■ Supports standard-length expansion cards (10.6 inches)

■ Mini-DTX / Mini-ITX motherboard & ATX PSU compatible

■ Supports 120mm or 140mm single fan All-in-One Liquid Cooler

■ Supports 2.5” and 3.5” hard drives

■ Elevated standoff for motherboard back side components

 

SPECIFICATIONS

Model No. SST-SG13B (black, mesh front panel)
SST-SG13B-Q (black, plastic front panel with faux aluminum finish)
SST-SG13WB (black&white, mesh front panel)
SST-SG13WB-Q (black&white, plastic front panel with faux aluminum finish)
SST-SG13P (pink, mesh front panel)
Material Mesh or plastic front panel, steel body
Motherboard Mini-DTX, Mini-ITX
Drive bay External --
--
Internal 3.5" x 1 or 2.5" x 2 , 2.5" x 1
Cooling system Front 1 x 120mm/140mm fan slot compatible with radiator(option)
Rear --
Side Oversized vents
Top Oversized vents
Bottom --
Internal --
Radiator support Front 120mm / 140mm x 1
Rear N/A
Top N/A
Bottom N/A
Expansion slot 2
Front I/O port USB 3.0 x 2
audio x 1
MIC x 1
Power supply Optional standard PS2(ATX)
Expansion card Compatible up to 10.6" (270mm) long, width restriction-5.11" (129mm)
Limitation of CPU cooler 61mm
Limitation of PSU 150mm*
Net weight SG13B:2.47Kg / SG13B-Q:2.43Kg
Dimension 222mm (W) x 181 mm (H) x 285 mm (D) 11.5 liters
8.74" (W) x 7.13" (H) x 11.22" (D) 11.5 liters

Remark
* Installing larger 140mm based radiator or fan will require the removal of the upper drive cage and sacrifice available room for graphics card to 9.3" (236mm) minus the thickness of the radiator.
* Maximum length for PSU is 150mm, we recommend 140mm due to varying connector locations on PSUs and the unique structure of SG13.

 




  • DOWNLOADS
  • RECOMMENDATIONS
  • PRODUCT REVIEWS
  • Q&A


Describe Ver Size Download
SG13 manual v1.0 2,814 KB
SG13 High resolution photos 23,676 KB
SG13 eDM (sg13_edm_en.pdf)   478 KB

CP07 SATA II cable are perfect for any regular SATA devices. more...
ECU04-E USB 3.1 PCI Express card with internal 19pin connector more...
CLEARCMOS Get a SST-CLEARCMOS add-on to conveniently clear CMOS without opening the case. more...
PP05-E Short cable set reduces cable clutter in smaller cases & systems. more...
FQ141 140mm ultra-quiet PWM fan more...
AR05 Advanced low-profile heatsink with Heat-pipe direct contact (HDC) technology more...
AR06 Advanced low-profile heatsink with Heat-pipe direct contact (HDC) technology more...
AR11 Advanced low-profile heatsink with Heat-pipe direct contact (HDC) technology more...
NT08-115XP 33mm super slim CPU cooler for Intel platform more...
TD03-SLIM Super slim all-in-one liquid cooler more...
ET550-G Power for everything you need more...
ET650-G Power for everything you need more...
ET750-G Power for everything you need more...
ST50F-PB Power supplies with excellent combination of features, efficiency, and durability. more...
This model utilizes the type of spray paint designed for better resistance to fingerprints and scratches, which is characterized by the tiny bumps.
Many Mini-ITX motherboards are currently designed based off of Intel’s reference layout, which means the CPU is likely positioned too close to the PCI Express slot and limits the size of CPU coolers that can be installed. Normally if the same size fan is used, a high-end air cooler is more efficient than liquid cooler. However, Mini-ITX motherboard restrictions usually limit air coolers that use 92mm fan or smaller so liquid coolers would have the advantage in the SG13 as the radiator is installed in the bottom of the case and not limited by the space around CPU area. We can fully recommend using liquid cooler in the SG13 as an alternative, our internal testing also shows liquid coolers to perform better than air coolers within the SG13.
Yes it does, with room to spare!