擴充卡     ECU01



■ 雙內接19pin USB 3.0接頭

■ 高速PCI-E Gen 2 (x2)介面,最大提供每秒10Gbit的傳輸頻寬

■ 支援Low-profile薄型小機殼

■ 支援UASP 與 Turbo Boost加速傳輸功能

         銀欣科技全球首推兩組內接19pin USB 3.0連接端子,ECU01擁有PCI-E Gen 2.0(x2)達到10Gbps超大頻寬,10Gbps超大頻寬提供穩定且快速的傳輸能力,當眾多USB 3.0裝置同時讀取時,ECU01超大10Gbps吞吐量能提供比普通擴充卡更多效能。 ECU01不但支援UASP加速(USB Attached SCSI Protocol),另外提供Turbo driver可讓無法享受UASP加速的玩家們,也可以享受到相似UASP加速的效果,強悍的ECU01將能滿足玩家們的效能渴望。


備註

Test environment



Performance test



Dual port concurrent test

 
 
 


型號 SST-ECU01
電力需求 SATA電源端子提供5Vdc
連接介面 Low profile - PCI Express 2.0 x 2(10Gbps)
USB 3.0 控制器 Etron EJ198
USB 連接埠 2組內接19pin USB3.0 接頭
傳輸速度 USB 3.0 (5Gbps), USB 2.0 (480Mbps), USB 1.1 (12Mbps)
作業系統支援 Windows 7 (32bit/64bit), 8, 8.1,10 (32bit/64bit) 或更高版本*, Ubuntu**, Linux***, MAC OS****
其它 UASP 與 Turbo Boost
備註 :
*User should not install the driver of ECU01, because Windows 8 or 8.1 has supported ECU01.
**User should not install the driver of ECU01, because Ubuntu has supported ECU01.
*** User should be checked whether the Linux has included XHCI function.
**** If the version of MAC OS is before 10.8.4, please directly install the driver. On the other hand, if the version of MAC OS is after10.8.4, the MAC OS will install the right driver.
***** 若您的作業系統與銀欣所開發出的擴充卡有發生相容性問題時,像是無法被系統偵測到裝置或裝置不被承認時,請更新您主機板上的驅動程式或BIOS至最新版本。您還可以嘗試在作業系統中執行系統相容性模式,並選擇之前作業系統的版本,來安裝擴展卡所需的驅動程式。


Any of specification change without notice.
CP09
External to internal USB 3.0 adapter cable 更多...
FP32-E
3.5" drive bay with 4 x USB 3.0 更多...
FP36-E
3.5” bay device for USB 3.0 and two 2.5” hard drives 更多...
FP37
Premium 3.5" front bay card reader with SDXC and USB 3.0 support 更多...
FT04
散熱動力學,新指標. 更多...
GD09
Incredible 358mm depth to fit comfortably inside home theater cabinet. 更多...
PS10
The Precision series PS10 is an affordable ATX tower case built for silent operation. 更多...
SG10
Enthusiasts small form factor chassis 更多...
 
 
描述
版本
大小
下載
ECU01 說明書
 v1.0 
2,810 KB
     
ECU01 Driver Windows 7
 0.119 
11,662 KB
     
ECU01 Driver Mac
 0.95 
286 KB
     
ECU01 Tubro driver Windows 7
 v1.0 
354 KB
     
Firmware for Windows
 0.03.01.500 
402 KB
     
ECU01 高解析度照片
  
1,680 KB
     


ECU01 eDM (ECU01_EDM_TW.jpg)
 
705 KB

A:We suggest that the user could use the default driver on Windows 8 or 8.1, based on the ECU01 performance. However, if the user has installed the driver already, the user could uninstall driver on the Control Panel and Computer Management.

A:User should be checked whether the version of Ubuntu system has supported XHCI function. If your version of Ubuntu system is after 14.04.1 LTS, the Ubuntu has supported XHCI function.

A:User should be checked whether the version of Linux system has supported XHCI function.

A:Yes, because Windows 7 did not supported the ECU01, the user should install the driver to activate the ECU01.

A:If user feel the ECU01 has compatibility problem, the user could update the latest firmware.

A:User could run the turbo boost program in Windows 7 from driver CD or copy this file into startup program folder to enable autorun this program when turn on computer. This program will detect USB HDD that is supported UASP or not.