FP52

■ Sophisticated fan control logic

■ Wide temperature range

■ Beautiful sapphire neon LCD

■ Aluminum bezels and polished buttons

 

사양

Black, Silver
재질 Aluminum front panel, steel sides
냉각 시스템 Dual air intake mesh
애플리케이션 5.25" drive bay
팬 출력 0V, 6 ~ 12V
LCD 디스플레이 Temperature, fan speed, alarm clock, time, system status
온도 범위 0 ~100°C
케이블 길이 800mm
순 중량 220g
치수 158 mm (W) x 42 mm (H) x 85 mm (D)
비고 :
Maximum output for one channel – 0.8amp (9.6W)
Maximum combined output for all three channels – 1.5amp (18W)

 




  • 다운로드
  • 권장사항
  • 제품 리뷰
  • Q&A


설명 Ver 크기 다운로드
FP52 Manual v1.0 1,298 KB

FT01 Performance Standard ATX tower chassis with aluminum unibody 추가 정보...
RV01 Extreme enthusiast extended ATX tower chassis 추가 정보...
SG12 Refinement of classic small form factor case 추가 정보...
Maximum output for one channel ¡V0.8amp
Maximum output for all three channels ¡V1.5amp
So you can have for example, 0.8amp on first, 0.3amp on second, and 0.4amp on third channel. But you can't have 0.8amp on all three channels at the same time.
The FP52 accepts only fans powered by 3pin connectors so you will need to use a 4pin to 3pin adapter for your 4pin fans.
Please make sure all the connections to FP52 are correct and double check your temperature settings again. There are three temperature values (CPU, SYS, HDD), if any of them are exceeded, the alarm will sound.
Your FP52 maybe defective. Please contact the SilverStone office closest to you for information on how you can obtain a replacement unit:
http://www.silverstonetek.com/contactus.php
Please check to see if the battery for the FP52 is properly seated in its slot. If it is, then the battery may need to be replaced. The FP52 uses "CR2032" sized lithium battery that is readily available in most electronics store.