FP52
￭ Hochentwickelte Temperatursteuerung
￭ Weiter Temperaturbereich
￭ Saphirfarbenes Neon-Display
￭ Aluminium- Frontblende mit diamantgeschliffenen Knöpfen
Spezifikationen
| Farbe | Schwarz, Silber |
| Gehäusematerial | Aluminium-Frontblende, Stahl-Halterung |
| Kühlsystem | 2 Lüftungsöffnungen mit Luftgitter |
| Anwendung | 5,25” Laufwerksschacht |
| Lüfterregulierung | 0V, 6 ~ 12V |
| LCD Display | Temperatur, Lüftergeschwindigkeit, System-Status, Alarm, Zeit, |
| Temperaturspanne | 0 ~100°C |
| Kabellänge | 800 mm |
| Nettogewicht | 220g |
| Abmessungen | 158mm (B) x 42mm (H) x 85mm (T) |
| Hinweis : |
| Maximum output for one channel – 0.8amp (9.6W) Maximum combined output for all three channels – 1.5amp (18W) |
|
PICTURES
- Downloads
- Empfehlungen
- Testberichte
- F & A
| Describe | Ver | Größe | Download |
 FP52 Manual |
v1.0 | 1,298 KB |  |
1. What is the maximum fan voltage draw that each of the fan connectors can support?
Maximum output for one channel ¡V0.8amp
Maximum output for all three channels ¡V1.5amp
So you can have for example, 0.8amp on first, 0.3amp on second, and 0.4amp on third channel. But you can't have 0.8amp on all three channels at the same time.
Maximum output for all three channels ¡V1.5amp
So you can have for example, 0.8amp on first, 0.3amp on second, and 0.4amp on third channel. But you can't have 0.8amp on all three channels at the same time.
2. I want to use the FP52 with 4pin fans, how do I connect them?
The FP52 accepts only fans powered by 3pin connectors so you will need to use a 4pin to 3pin adapter for your 4pin fans.
3. The FP52 beeps non-stop and my temperatures are below the preset alarm value, what is going on?
Please make sure all the connections to FP52 are correct and double check your temperature settings again. There are three temperature values (CPU, SYS, HDD), if any of them are exceeded, the alarm will sound.
4. I have checked all the connections and values set, the beeps still continues non-stop. What should I do?
Your FP52 maybe defective. Please contact the SilverStone office closest to you for information on how you can obtain a replacement unit:
http://www.silverstonetek.com/contactus.php
http://www.silverstonetek.com/contactus.php
5. Every time I turn off and on my system the date and my saved settings are lost.
Please check to see if the battery for the FP52 is properly
seated in its slot. If it is, then the battery may need to be replaced.
The FP52 uses "CR2032" sized lithium battery that is readily available in most electronics store.