FP52

■ 精密風扇控制邏輯

■ 廣泛溫度控制範圍

■ 特別天藍霓虹燈LCD

■ 精緻鋁合金面板與拋光按鍵

規格

顏色 黑, 銀
材質 Aluminum front panel, steel sides
冷卻系統 Dual air intake mesh
應用 5.25"磁碟槽
風扇電力 0V, 6 ~ 12V
LCD 顯示 Temperature, fan speed, alarm clock, time, system status
溫度幅度 0 ~100°C
線長 800mm
淨重 220g
尺寸 158 mm (寬) x 42 mm (高) x 85 mm (深)
備註 :
Maximum output for one channel – 0.8amp (9.6W)
Maximum combined output for all three channels – 1.5amp (18W)
  • 推薦產品
  • 產品評論
  • 下載
  • 問與答
FT01
Performance Standard ATX tower chassis with aluminum unibody 更多...
RV01
Extreme enthusiast extended ATX tower chassis 更多...
SG12
Refinement of classic small form factor case 更多...


描述
版本
大小
下載
FP52 說明書 v1.0 1,298 KB

Maximum output for one channel ¡V0.8amp
Maximum output for all three channels ¡V1.5amp
So you can have for example, 0.8amp on first, 0.3amp on second, and 0.4amp on third channel. But you can't have 0.8amp on all three channels at the same time.
The FP52 accepts only fans powered by 3pin connectors so you will need to use a 4pin to 3pin adapter for your 4pin fans.
Please make sure all the connections to FP52 are correct and double check your temperature settings again. There are three temperature values (CPU, SYS, HDD), if any of them are exceeded, the alarm will sound.
Your FP52 maybe defective. Please contact the SilverStone office closest to you for information on how you can obtain a replacement unit:
http://www.silverstonetek.com/contactus.php
Please check to see if the battery for the FP52 is properly seated in its slot. If it is, then the battery may need to be replaced. The FP52 uses "CR2032" sized lithium battery that is readily available in most electronics store.