FP52

■ Sofisticado sistema de control de ventiladores

■ Amplio rango de temperaturas

■ Hermosa pantalla LCD

■ Frontal y pulidos botones de aluminio

 

Especificaciones

Color Negro,Plata
Material Panel frontal de aluminio, lados de acero
Sistema de refrigeración Doble rejilla de entrada
Aplicación Bahía de 5.25”
Salida del ventilador 0V, 6 ~ 12V
Pantalla de crístal líquido Temperatura, velocidad de ventiladores, reloj de alarma, hora, estatus del sistema
Rango de temperatura 0 ~100°C
Largo del cable 800mm
peso neto 220g
medidas 158 mm (Ancho) x 42 mm (Alto) x 85 mm (Fondo)
Recordatorio :
Maximum output for one channel – 0.8amp (9.6W)
Maximum combined output for all three channels – 1.5amp (18W)

 




  • Descargas
  • Recomendaciones
  • Reseña del producto
  • P y R


Describe Ver tamaño Descarga
FP52 Manual v1.0 1,298 KB

FT01 Performance Standard ATX tower chassis with aluminum unibody Más...
RV01 Extreme enthusiast extended ATX tower chassis Más...
SG12 Refinement of classic small form factor case Más...
Maximum output for one channel ¡V0.8amp
Maximum output for all three channels ¡V1.5amp
So you can have for example, 0.8amp on first, 0.3amp on second, and 0.4amp on third channel. But you can't have 0.8amp on all three channels at the same time.
The FP52 accepts only fans powered by 3pin connectors so you will need to use a 4pin to 3pin adapter for your 4pin fans.
Please make sure all the connections to FP52 are correct and double check your temperature settings again. There are three temperature values (CPU, SYS, HDD), if any of them are exceeded, the alarm will sound.
Your FP52 maybe defective. Please contact the SilverStone office closest to you for information on how you can obtain a replacement unit:
http://www.silverstonetek.com/contactus.php
Please check to see if the battery for the FP52 is properly seated in its slot. If it is, then the battery may need to be replaced. The FP52 uses "CR2032" sized lithium battery that is readily available in most electronics store.