■ Up to eight 2.5" drives and one 3.5" drive capacity

■ Innovative drive cage design enables support for front and rear AIO liquid coolers

■ Modular design with removable drive cage, motherboard tray, and top panel

■ Includes two quiet 120mm fans

■ Convenient externally removable fan filters

■ Independent power supply intake vents



Model No. SST-KL06B (black)
SST-KL06B-W (black + window)
Material Plastic front panel with steel mesh, steel body
Motherboard Micro-ATX, Mini-DTX, Mini-ITX
Drive bay External 5.25" x 2
Internal 3.5" x 1 , 2.5” x 8
Cooling system Front 120mm intake fan x 2, 1200rpm, 20dBA
Rear 120mm fan slot x 1
Side --
Top --
Bottom --
Internal --
Radiator support Front 120mm x 2 / 140mm x 1 /240mm x 1
Rear 120mm x 1
Top N/A
Bottom N/A
Expansion slot 4
Front I/O port USB 3.0 x 2
Audio x 1
MIC x 1
Power supply Optional PS2(ATX)
Expansion card Compatible up to 14.5" (368mm) long, width restriction-6.69" (169mm)
Limitation of CPU cooler 165mm
Limitation of PSU 180mm*
Net weight 5.5kg
Dimension 211mm (W) x 375mm (H) x 405mm (D), 32 liters
8.31" (W) x 14.76" (H) x 15.94" (D), 32 liters
Extra Support two Kensington locks

* Power supply and optical drive’s combined allowable total length is 399mm including connectors, which may take up additional 20mm. We suggest maximum length for PSU at 180mm (ST1200-G).


  • Q&A

Describe Ver Size Download
KL06 Manual v1.0 3,776 KB
KL06 High resolution photos 23,509 KB
KL06 eDM (kl06_edm_en.pdf)   716 KB

CP06-E Super flexible multi-SATA power connectors with capacitors. more...
FP56 The FP56 provides three USB 3.0 and one high speed charging port. Additional mounting slots for two 2.5” hard drives or SSDs further add to the flexibility of FP56. more...
FQ122 120mm ultra-quiet PWM fan more...
AR03 Advanced heatsink with Heat-pipe Direct Contact (HDC) technology more...
FS204 One 5.25" device bay to four 2.5" SAS/SATA 6 Gbit/s hot-swap cage more...
FSR202 5.25" bay to dual 2.5" SATA 6 Gbit/s hot-swap cage with RAID 0 and 1 more...
ST1500-GS World’s smallest, full-modular ATX power supplies more...
We recommend installing CPU’s cooler to the front and graphics card’s to the rear.
If the motherboard interferes with installation of the bottom-most hard drive, please remove the drive cage by loosening the screws from the bottom panel holding the drive cage.