FT03-MINI

■ Design d’ingombro super mini senza cavi né prese d'aria sui quattro lati

■ Ampio spazio per il raffreddamento della cpu ( 82mm di altezza )

■ Distanziali per la scheda madre di lunghezza maggiore a protezione dei componenti sul retro della scheda madre

■ Include una ventola Air Penetrator 140 mm e supporta sistemi di base di raffreddamento a liquido

■ Supporto di due dischi rigidi SSD 2,5" e di un disco rigido 3,5"

■ Compatibile con schede madri Mini-DTX / Mini-ITX e PSU SFX

■ Supporto per schede di espansione da 10" (254mm) di lunghezza.

Osservazioni

Graphic card length reference:
ATI Radeon HD 4850/4830 - 9”
NVIDIA GeForce 9800GT - 9"
NVIDIA GeForce 9600GT/GSO - 9"
NVIDIA GeForce 8800GS/GT/GTS - 9"
NVIDIA GeForce GTX 680 - 10"

 

Specifiche

Modello nr. SST-FT03B-MINI (Nero)
SST-FT03S-MINI (Silver)
Materiale Guscio esterno in alluminio, struttura in acciaio
Scheda madre Mini-DTX, Mini-ITX
Alloggiamento Esterno 12.7mm Slot loading slim optical drive x 1
--
Interno 3.5” x 1 , 2.5”x2
Sistema di raffreddamento Frontale --
Posteriore --
Laterale --
Superiore --
Inferiore 1 x 140mm Air Penetrator fan, 1500rpm
Interno --
Slot d 2
porte frontali d'entrata/uscita USB 3.0 x 2
Audio x 1
MIC x 1
Alimentatore 1 x Optional standard SFX
Card grafiche Può accogliere schede di espansione lunghe fino a 10" (254mm), Limitazione della larghezza- 5,11" (129mm)
Limite del dissipatore della CPU 82mm
Limitazione di PSU SFX PSU
Peso netto 4.7kg
Dimensioni 188.9mm(W)x 397mm(H)x235.1mm(D), 17.6 litri

 




  • Downloads
  • Raccomandazioni
  • Recensioni Sull'articolo
  • Domande e Risposte


Describe Ver Taglia Download
FT03-MINI manual v1.0 4,576 KB
FT03-MINI High resolution photos 2,120 KB
FT03-MINI eDM (IT-FT03-MINI-EDM.pdf)   293 KB

CP08 SATA III cable with non-scratch locking mechanism and 90° connector altro...
CLEARCMOS Get a SST-CLEARCMOS add-on to conveniently clear CMOS without opening the case. altro...
AR06 Dissipatore di calore avanzato a basso profilo con tecnologia HDC (Heat-pipe Direct Contact) altro...
NT06-PRO CPU cooler designed for SFF. altro...
ST45SF SFX ST45SF is smaller and has shorter cables to enable additional room inside the case altro...
ST45SF-G SFX PSU with 80 PLUS Gold efficiency and 100% modular cables altro...
SX500-G Alimentatore SFX standard altro...
SX600-G Une nouvelle étape pour le format SFX altro...
SX650-G Alimentatore SFX standard altro...
SOD03 Unità ottica CD/DVD-RW 8X caricamento da slot SATA da 9,5 mm altro...
Many Mini-ITX motherboards are currently designed based off of Intel’s reference layout, which means the CPU is likely positioned too close to the PCI Express slot and limits the size of CPU coolers that can be installed. Normally if the same size fan is used, a high-end air cooler is more efficient than liquid cooler. However, Mini-ITX motherboard restrictions usually limit air coolers that use 92mm fan or smaller so liquid coolers would have the advantage in the FT03-MINI as the radiator is installed in the bottom of the case and not limited by the space around CPU area. We can fully recommend using liquid cooler in the FT03-MINI as an alternative, our internal testing also shows liquid coolers to perform better than air coolers within the FT03-MINI.
There are two main types of heat pipes used in popular aftermarket coolers, they are groove and powder. Groove heat pipes are very susceptible to gravity while powder heat pipes are less so. To achieve best performance in either heat pipe technology, they need to be placed horizontally or have the heat source side located below the other end of the heat pipe. We recommend choosing and installing components with heat pipes carefully by taking into consideration of the following examples:

Motherboard:

The orientation of an enthusiast motherboard in a normal ATX case


The orientation of an enthusiast motherboard in the FT03-MINI

As the illustrations above show, most enthusiast motherboards with heat pipes will work fine in the FT03-MINI, the heat source is located below other parts of the heat pipe.
CPU cooler:
Horizontal style cooler


Good orientation Good orientation Bad orientation


Many CPU coolers can be rotated when installing on motherboards, the illustration here shows a SilverStone NT06-E

VGA cooler


The illustration here shows a VGA cooler that will not work well in the FT03-MINI because the heat source side (touching the GPU) ends up being located higher than the other end.