FP37

■ Unterstützt interne Standard-USB 3.0-Anschlüsse (19pin)

■ Passt in jeden 3.5’’ Einschub

■ Voll Unterstützung des SDXC Kartenformats

■ Zusätzliche Anschlüsse für SuperSpeed USB 3.0

■ Unterstützt USB 3.0 für maximale Übertragungsgeschwindigkeit

Hinweis

CF card needs to be installed upside down.

 

Spezifikationen

Modell Nr. SST-FP37
Gehäusematerial SECC
Farbe Schwarz , Silber
Frontanschlüsse 1 x USB 3.0 port
Anschluss USB 3.0 (5Gbps)
Media card power requirement USB powered
Media Card Unterstützung SD / SDHC / SDXC / Mini SD / Micro SD(T-Flash)(No Card Adapter Required) / MS / MS Duo / MS PRO / MS PRO Duo / MS Micro(M2)(No Card Adapter Required) / MS PRO-HG Duo / MMC / RS MMC / MMC Micro / MMC Mobile / xD / CF
Unterstützte Betriebssysteme Windows XP, Vista, Mac OS 9.x / X, Windows 7 / Win8
Abmessungen 101.6mm (W) x 25.5mm (H) x 136mm (D)
Gewicht 0.3kg

 




  • Downloads
  • Empfehlungen
  • Testberichte
  • F & A


Describe Ver Größe Download
FP37 firmware
       Note:Improve system compatibility
0579 293 KB
FP37 High resolution photos 911 KB
FP37 eDM (DE-FP37.jpg)   190 KB

FP55 Use FP55 to support one 3.5" and two 2.5" devices in a 5.25" drive bay. mehr...
PS07 Redefining the value Micro-ATX chassis mehr...
PS10 The Precision series PS10 is an affordable ATX tower case built for silent operation. mehr...
There are two versions of FP37, please check your serial number below and download the appropriate firmware.
Note: if incorrect firmware is used, the FP37 will still function properly but it might affect the LED light’s function.

V1.2
AL11430001~AL11431163
AL12010001~AL12011003
AL12060001~AL12061003
Download firmware FW0561 and install by executing the unzipped file.Download

V1.3
AL12130001~AL12131003
AL12180001~AL12181003
AL12190001~AL12191003
Download firmware DP04 and install by executing the unzipped file.Download
Please make sure all cables have been connected firmly and correctly. Also go to “Device Manager” if a yellow question mark appears like the below diagram, it means your motherboard’s driver is not up-to-date, please download the latest driver from your motherboard’s manufacturer website to solve this problem.

Route:
Start → Control Panel → Device Manager→ Under View select Device by connection → PCI bus
Under PCI bus, there will by multiple PCI standard PCI to PCI bridge devices.
Click open the available options until the device appears like the attached diagram