SG07

■ Châssis SFF haut de gamme avec ventilateur de 180mm et pression positive

■ Large espace pour les ventirads CPU (117mm en hauteur)

■ Plateau de carte mère surélevé

■ Emplacement pour deux unités 2.5 pouces et une 3.5 pouces

■ Alimentation 80 Plus Bronze 600 watts incluse

■ VGA Duct ajustable pour une meilleure efficacité

■ Filtres amovibles sur le ventilateur, l’alimentation et le VGA Duct

■ Supports des cartes graphiques jusqu’à 12.2” et 400W

■ Façade ABS, plaquage Aluminium et châssis Acier SECC

Remarque

AMD Radeon HD 5970 – 12.2"
AMD Radeon HD 6990 – 12"
AMD Radeon HD 6970 – 11"
AMD Radeon HD 6950 – 11"
NVIDIA GeForce GTX690 – 11"
AMD Radeon HD 6870 – 10.5"
NVIDIA GeForce GTX580 – 10.5"
NVIDIA GeForce GTX680 – 10"
NVIDIA GeForce GTX670 – 9.5"
AMD Radeon HD 6850 – 9"

 

Spécifications

Modèle N° SST-SG07B(Noir)
SST-SG07B-W(Noir+ fenêtre)
SST-SG07B-USB3.0(Noir)
SST-SG07B-W-USB3.0(Noir+ fenêtre)
Matériau utilisé Panneau frontal en plastic haute densité, châssis en SECC
Carte mère Mini-DTX, Mini-ITX
Baies Externe 1 x lecteur optique Slim
--
Interne 3.5” x 1 , 2.5”x 2
Systeme de refroidissement façade --
Arrière --
Côté VGA Duct ajustable
Dessus 1 vent.de 180mm en admission 700/1200 tr/min, 18/34BA
Le fond 1 emplacement pour vent. de 120mm
Interne --
Emplacement d’extension 2
Ports E/S en façade USB 2.0 x 2 (SST-SG07B, SST-SG07B-W only)
USB 3.0 x 2 (SST-SG07B-USB3.0, SST-SG07B-W-USB3.0 only)
1 x Audio
1 x MIC
Alimentation Alimentation 80 Plus Bronze 600 watts incluse
Carte graphique Compatible avec les cartes d'extension jusqu'à 12,2" (309mm), la restriction de largeur – 4,38" (111mm)
Limitation du refroidisseur de l'unité centrale 117mm
Limitation d'unités d'alimentation électrique 140mm (remove VGA Card if you want install up to 170mm)
Poids net 4.9kg (SG07B)
5kg (SG07B-W)
Dimensions 222 mm (L) x 190 mm (H) x 350 mm (P), 14.8 litres

Remarque
AMD Radeon HD 5970 – 12.2"
AMD Radeon HD 5870 – 11"
NVIDIA GeForce GTX480 – 10.5"
AMD Radeon HD 5850 – 9.5"
NVIDIA GeForce GTX470 – 9.5"


Model No.
SST-ST60F-SG
Sortie Max. DC
600W
Couleur
Black(peinture sans plomb)
Plage de charge
 
+3.3V +5V +12V +5VSB -12V
Max.(Amps)
25A 25A 46A 3.0A 0.8A
Min.(Amps)
0.8A 0.5A 4A 0.1A 0A
Range (%)
+/-5% +/-5% +/-5% +/-5% +/-10%
Ripple(mVp-p)
50mV 50mV 120mV 50mV 120mV
+3.3V combinés, +5V
140W
+12v combinés
46A / 552W
Voltage en entrée
90V ~ 265V(Auto Range)
Gamme de fréquence d’entrée
47Hz ~ 63Hz
PFC
Active PFC (PF>0.95 at full load)
Rendement
82%~85% à 20%~100% de charge
MTBF
100,000 heures à 25°C, en plein charge
Température de fonctionnement
10°C ~ 50°C
Protections
Protection contre les surcharges
Protection contre les surtensions
Protection contre le survoltage
protection contre la température
Protection contre les courts-circuits
Connecteurs
1 connecteur 24 / 20-Pin pour carte mère (670mm)
1 connecteur 8 / 4-Pin EPS / ATX 12V(670mm)
1 connecteurs 8/6-Pin PCIE(360mm)
1 connecteurs 8/6-Pin PCIE(380mm)
3 connecteurs SATA(350mm / 130mm / 150mm)
2 connecteurs 4-Pin AUX (350mm / 100mm)
Système de refroidissement
Unique ventilateur de 120mm
Facteur de forme
Niveau sonore
19 dBA - 30dBA
Dimensions
150 mm (L) x 86 mm (H) x 140 mm (P)
Poids
940g
Certification
80 PLUS Bronze
Autre
GPU Support list
Compatible with ATX12V v2.4
● Specifications presented on this page contains most recent revisions and may differ from those printed on retail boxes or manuals.

 




  • Téléchargements
  • Recommandations
  • Tests de products
  • Q&R


Describe Ver Taille Téléchargement
SG07 Manual v1.0 3,151 KB
SG07 High resolution photos 7,819 KB
SG07 eDM (FR-SG07-EDM.pdf)   508 KB

CP08 SATA III cable with non-scratch locking mechanism and 90° connector plus...
SDP08 Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. plus...
AP181 Equip your chassis with AP181 as the intake fan for extreme cooling performance. plus...
AP183 Ventilateur de canalisation d'air 180 mm avec PWM et double roulement à billes plus...
AR06 Advanced low-profile heatsink with Heat-pipe direct contact (HDC) technology plus...
NT06-PRO CPU cooler designed for SFF. plus...
SOD03 Lecteur optique 9,5mm SATA Slot load 8x CD/DVD-RW plus...
TOB03 Graveur Blu-ray 6x fin à chargement par plateau de 9,5 mm plus...
Recommended motherboard
  • If GTX 480 is installed into the SG07 directly, the fan will not install correctly because the GTX 480’s heat pipes will interfere with the brace holding the fan.





  • Overlooking the case from the top, the heat pipes do not make contact with the frame so there is enough space to install GTX 480 in the SG07.




  • By removing the brace from the fan, the GTX 480 can be installed with the fan frame touching the heat pipes slightly.




The SG07 is a Mini-ITX case with unprecedented cooling capability. To fully take advantage of this, users can purchase larger aftermarket CPU cooler.

We firstly recommend getting motherboards such as DFI’s LANParty MI P55-T36 for use in the SG07. Its CPU socket location enables it to accommodate various aftermarket coolers including some tower style ones.


If you need to use H55 based Mini-ITX boards such as Zotac’s H55-ITX WiFi that has CPU socket very close to the PCI-E slot, then the CPU cooler choices will be more limited.


We have tested several aftermarket CPU coolers and found that the Thermalright AXP-140 to be compatible with H55 based Mini-ITX motherboard. Please refer to the following photos for example of a build with this CPU cooler and motherboard combination:

(Special note: The 120mm fan installed on top of the CPU cooler is for reference only, it is not required for safe operation as SG07’s included AP181 on top of the case can provide enough cooling to support CPU up to 95W power level.)
There is a power switch located directly on SG07's power supply and it maybe in the "off" position. The switch is located next to the power cord connector on the power supply, please check it and make sure it is in the "on" position.

1. Loosen three screws located on the back of SG07.
     

2. Push top-cover in the direction as shown gently and finally pull up to detach the top-cover
     

3. Loosen four screws located on optical drive bracket and detach it gently.
     

4. Loosen two screws located on hard drive bracket and detach it gently.
     

5. Unplug power cord.
     

6. Loosen two screws near front I/O module and detach it gently.
     

7. Install USB 3.0 front I/O module (part number: G11303260) and secure with screws.
     

8. Assemble parts back in reverse order carefully.
     Your case is now USB3 ready.