■ Class leading SFF chassis with 180mm fan and positive pressure cooling

■ Ample space for CPU cooling (117mm in height)

■ Elevated standoff for motherboard back side components

■ Supports for two 2.5” SSD/hard drives and one 3.5” hard drive

■ Includes 80 PLUS Bronze certified 600W@50℃ PSU with single +12V rail

■ Adjustable VGA fan duct for improved cooling efficiency

■ Removable fan filters included for case fan, PSU, and VGA duct

■ Supports graphics cards up to 12.2 inches and 400W


AMD Radeon HD 5970 – 12.2"
AMD Radeon HD 6990 – 12"
AMD Radeon HD 6970 – 11"
AMD Radeon HD 6950 – 11"
NVIDIA GeForce GTX690 – 11"
AMD Radeon HD 6870 – 10.5"
NVIDIA GeForce GTX580 – 10.5"
NVIDIA GeForce GTX680 – 10"
NVIDIA GeForce GTX670 – 9.5"
AMD Radeon HD 6850 – 9"



Model No. SST-SG07B(black)
Material Plastic front panel with aluminum plate, SECC body
Motherboard Mini-DTX, Mini-ITX
Drive bay External Slim optical x 1
Internal 3.5” x 1 , 2.5”x 2
Cooling system Front --
Rear --
Side VGA fan duct with oversized vents
Top 180mm Air Penetrator 700/1200rpm, 18/34dBA
Bottom PSU intake vents and VGA exhaust divider
Internal --
Expansion slot 2
Front I/O port USB 2.0 x 2 (SST-SG07B, SST-SG07B-W only)
USB 3.0 x 2 (SST-SG07B-USB3.0, SST-SG07B-W-USB3.0 only)
Audio x 1
MIC x 1
Power supply Custom 600W with 80 PLUS Bronze certification and single +12V rail
Expansion card Compatible up to 12.2" (309mm) long, width restriction-4.38" (111mm)
Limitation of CPU cooler 117mm
Limitation of PSU 140mm (remove VGA Card if you want install up to 170mm)
Net weight 4.9kg (SG07B)
5kg (SG07B-W)
Dimension 222 mm (w) x 190 mm (h) x 350 mm (d), 14.8 liters
8.74" (w) x 7.48" (h) x 13.78" (d), 14.8 liters

AMD Radeon HD 5970 – 12.2"
AMD Radeon HD 5870 – 11"
NVIDIA GeForce GTX480 – 10.5"
AMD Radeon HD 5850 – 9.5"
NVIDIA GeForce GTX470 – 9.5"

Model No.
Max. DC Output
Black (Lead-Free Paint)
Load Range
+3.3V +5V +12V +5VSB -12V
25A 25A 46A 3.0A 0.8A
0.8A 0.5A 4A 0.1A 0A
Range (%)
+/-5% +/-5% +/-5% +/-5% +/-10%
50mV 50mV 120mV 50mV 120mV
Combined +3.3V & +5V
Combined +12V
46A / 552W
Input Voltage
90V ~ 265V(Auto Range)
Input Frequency Range
47Hz ~ 63Hz
Active PFC (PF>0.95 at full load)
82%~85% at 20%~100% loading
100,000 hours at 25°C, full load
Operating temperature
10°C ~ 50°C
Over current protection
Over power Protection
Over voltage protection
Under voltage protection
Short circuit protection
1 x 24 / 20-Pin Motherboard connector (670mm)
1 x 8 / 4-Pin EPS / ATX 12V connector (670mm)
1 x 8/6-Pin PCIE connector (360mm)
1 x 8/6-Pin PCIE connector (380mm)
3 x SATA connector (350mm + 130mm + 150mm)
2 x 4-Pin Peripheral connector (350mm + 100mm)
Cooling System
Single 120mm fan
Form factor
Noise Level
19 dBA - 30dBA
150 mm (W) x 86 mm (H) x 140 mm (D)
5.91" (W) x 3.39" (H) x 5.51" (D)
80 PLUS Bronze
GPU Support list
Compatible with ATX12V v2.4
● Specifications presented on this page contains most recent revisions and may differ from those printed on retail boxes or manuals.


  • Q&A

Describe Ver Size Download
SG07 Manual v1.0 3,151 KB
SG07 High resolution photos 7,819 KB
SG07 eDM (EN-SG07-EDM.pdf)   506 KB

CP08 SATA III cable with non-scratch locking mechanism and 90° connector more...
SDP08 Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more...
AP181 Equip your chassis with AP181 as the intake fan for extreme cooling performance. more...
AP183 180mm air channeling fan with PWM & dual ball bearing more...
AR06 Advanced low-profile heatsink with Heat-pipe direct contact (HDC) technology more...
NT06-PRO CPU cooler designed for SFF. more...
SOD03 9.5mm SATA Slot Load 8X CD/DVD-RW Optical Drive more...
TOB03 9.5mm tray-loading slim 6x Blu-ray writer more...
Recommended motherboard
  • If GTX 480 is installed into the SG07 directly, the fan will not install correctly because the GTX 480’s heat pipes will interfere with the brace holding the fan.

  • Overlooking the case from the top, the heat pipes do not make contact with the frame so there is enough space to install GTX 480 in the SG07.

  • By removing the brace from the fan, the GTX 480 can be installed with the fan frame touching the heat pipes slightly.

The SG07 is a Mini-ITX case with unprecedented cooling capability. To fully take advantage of this, users can purchase larger aftermarket CPU cooler.

We firstly recommend getting motherboards such as DFI’s LANParty MI P55-T36 for use in the SG07. Its CPU socket location enables it to accommodate various aftermarket coolers including some tower style ones.

If you need to use H55 based Mini-ITX boards such as Zotac’s H55-ITX WiFi that has CPU socket very close to the PCI-E slot, then the CPU cooler choices will be more limited.

We have tested several aftermarket CPU coolers and found that the Thermalright AXP-140 to be compatible with H55 based Mini-ITX motherboard. Please refer to the following photos for example of a build with this CPU cooler and motherboard combination:

(Special note: The 120mm fan installed on top of the CPU cooler is for reference only, it is not required for safe operation as SG07’s included AP181 on top of the case can provide enough cooling to support CPU up to 95W power level.)
There is a power switch located directly on SG07's power supply and it maybe in the "off" position. The switch is located next to the power cord connector on the power supply, please check it and make sure it is in the "on" position.

1. Loosen three screws located on the back of SG07.

2. Push top-cover in the direction as shown gently and finally pull up to detach the top-cover

3. Loosen four screws located on optical drive bracket and detach it gently.

4. Loosen two screws located on hard drive bracket and detach it gently.

5. Unplug power cord.

6. Loosen two screws near front I/O module and detach it gently.

7. Install USB 3.0 front I/O module (part number: G11303260) and secure with screws.

8. Assemble parts back in reverse order carefully.
     Your case is now USB3 ready.