■ 3개의 초저소음 120mm 팬 기본 제공
■ 양압 디자인으로 최고의 냉각 성능 및 정숙성 먼지 유입 방지
■ 놀라운 325mm의 극소 깊이로 어떤 홈시어터 캐비넷에서 손쉽게 장착 가능
■ 손쉬운 설치를 위해 디자인된 케이블 정리 제공
■ 180mm 길이의 파워 서플라이까지 지원
■ 11” 까지 확장카드 크기 지원
■ 2.5” 하드 디스크 혹은 SSD 지원
Graphic card length reference:
AMD Radeon HD 5870 11"
NVIDIA GeForce GTX295/280/260/275 - 10.5"
NVIDIA GeForce 9800GTX/9800GTX+ - 10.5"
AMD Radeon HD 4870X2 - 10.5"
AMD Radeon HD 5850 - 9.5"
NVIDIA GeForce 9800GTX/9600GT/GTO - 9"
AMD Radeon HD 4870/4850 - 9"
모델 번호 |
SST-GD05B(블랙) SST-GD05B-USB3.0(블랙) |
|
재질 | Aluminum skin over plastic front panel, 0.8mm SECC body | |
메인보드 | Micro-ATX, Mini-DTX, Mini-ITX | |
드라이브 베이 | 외부 | 5.25" x 1 |
-- | ||
내부 | 3.5" x 2 , 2.5” x 1 or 3.5" x 1 , 2.5” x 2 | |
냉각 시스템 | 전면 | -- |
후면 | 2 x 80mm 팬슬롯(쿨러 옵션장착) | |
측면 | Right:2 x 120mm 흡기팬, 1200rpm, 20dBA Left:1 x 120mm 흡기팬, 1200rpm, 20dBA 또는, 80mm 팬 장착가능 |
|
상단 | -- | |
하단 | -- | |
내부 | -- | |
확장 슬롯 | 5 | |
전면 I/O 포트 | USB 2.0 x 2 (GD05B only) USB 3.0 x 2 (GD05B-USB3.0 only) 오디오 x 1 마이크 x 1 |
|
전원 공급장치 | Support standard PS2(ATX) | |
확장 카드 | 11" (279mm) 그래픽 카드 지원가능, 폭 제약 - 4.92" (124mm) | |
CPU 쿨러의 한계 | 70mm (remove ODD if you want install up to 120mm) | |
PSU의 한계 | 180mm (remove Left fan replacement as 80mm if you want install up to 220mm) | |
순 중량 | 4.7kg | |
치수 | 440 mm (W) x 151 mm (H) x 325 mm (D), 21.6 리터 | |
예비 | support Kensington lock (v1.4 or after) |
![]() |
설명 | Ver | 크기 | 다운로드 |
![]() |
v1.0 | 5,533 KB | ![]() |
![]() |
811 KB | ![]() |
|
|
The TS03 supports slim optical drive to reduce the depth required in the 5.25” optical drive bay. It can increase the space for CPU cooler in the GD05. The limitations of installing NT06-E into the GD05 are as follow:
The distance from CPU to motherboard edge.
55.5mm<x<68mm
69.5mm<y<89mm
The distance from CPU to motherboard edge.
59.5mm<x<96.5mm
98mm<y<117.5mmThe above limitations apply only if graphics card is installed in the first expansion slot and with rear 80mm fans installed.
If fans are removed, y distance decreases by 25mm
If graphics card is installed in the second expansion slot, the x distance increases by 20mm
Installation guide
1. Loosen three screws located on the back of GD05 and detach top-cover gently.
2. Loosen four screws located on hard drive bracket and detach it gently.
3. Loosen two screws near front I/O module and detach it gently.
4. Install USB 3.0 front I/O module (part number: G11303260) and secure with screws.
5. Assemble parts back in reverse order carefully. Your case is now USB3 ready.