■ Ample space for CPU cooling (82mm in height)
■ Elevated standoff for motherboard back side components
■ Unprecedented 120mm fan in mini casing for positive pressure cooling
■ Supports 2.5” and 3.5” hard drives
■ Mini-DTX / Mini-ITX motherboard & SFX PSU compatible
■ 80 Plus certified SFX 300W power supply included
■ Standard-length expansion cards support (10 inches)
Model No. |
SST-SG05B (black) SST-SG05W (white) SST-SG05B-USB3.0 (black) SST-SG05W-USB3.0 (white) |
|
Material | Plastic front panel, 0.6mm SECC body | |
Motherboard | Mini-DTX, Mini-ITX | |
Drive bay | External | Slim optical x 1 |
-- | ||
Internal | 3.5” x 1 , 2.5”x 1 | |
Cooling system | Front | 1 x 120mm intake fan 1200rpm |
Rear | -- | |
Side | Oversized vents | |
Top | Oversized vents | |
Bottom | -- | |
Internal | -- | |
Expansion slot | 2 | |
Front I/O port | USB 3.0 x 2 (SG05B-USB3.0, SG05W-USB3.0 only) USB 2.0 x 2 (SG05B, SG05W only) Audio x 1 MIC x 1 |
|
Power supply | SFX 300W with 80 PLUS certification (SilverStone tuned) | |
Expansion card | Compatible up to 10" (254mm) long, width restriction-5.11" (129mm)* | |
Limitation of CPU cooler | 82mm | |
Limitation of PSU | SFX | |
Net weight | 3.52 kg | |
Dimension | 222 mm (W) x 176 mm (H) x 276 mm (D), 10.8 liters 8.74" (W) x 6.93" (H) x 10.87" (D), 10.8 liters |
Remark |
Power supply type | SFX |
||||||||||||||||||||||||||||||||||||||||||
Max. DC Output |
300W
|
||||||||||||||||||||||||||||||||||||||||||
Color |
SECC
|
||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||
Combined +3.3V & +5V |
125W
|
||||||||||||||||||||||||||||||||||||||||||
Combined +12V |
22A / 264W
|
||||||||||||||||||||||||||||||||||||||||||
Input Voltage |
90V ~ 264V(Auto Range)
|
||||||||||||||||||||||||||||||||||||||||||
Input Frequency Range |
47Hz ~ 63Hz
|
||||||||||||||||||||||||||||||||||||||||||
PFC |
Active PFC (PF>0.95 at full load)
|
||||||||||||||||||||||||||||||||||||||||||
Operating temperature |
0 ~ 50°C
|
||||||||||||||||||||||||||||||||||||||||||
Protection |
Over current protection, Over power protection, Over voltage protection, Short circuit.
|
||||||||||||||||||||||||||||||||||||||||||
Connectors |
1 x 24-pin motherboard connector (300mm)
1 x 4-pin ATX12V connector (400mm) 1 x 6-pin PCI-E connector (400mm) 1 x triple SATA connector (300mm +200mm +100mm) 1 x dual 4-pin IDE (300mm + 200mm) 1 x single floppy power connectors (300mm + 200mm + 200mm) |
||||||||||||||||||||||||||||||||||||||||||
Cooling System |
Single 80mm fan
|
||||||||||||||||||||||||||||||||||||||||||
Form factor | |||||||||||||||||||||||||||||||||||||||||||
Noise Level |
19 dBA minimum
|
||||||||||||||||||||||||||||||||||||||||||
Dimension |
125 mm (W) x 63.5 mm (H) x 100 mm (D)
4.92" (W) x 2.5" (H) x 3.94" (D) |
||||||||||||||||||||||||||||||||||||||||||
Weight |
940g
|
||||||||||||||||||||||||||||||||||||||||||
Certification |
80 PLUS
|
||||||||||||||||||||||||||||||||||||||||||
Other |
GPU Support list
Compatible with ATX12V v2.4 |
● Specifications presented on this page contains most recent revisions and may differ from those printed on retail boxes or manuals. |
![]() |
Describe | Ver | Size | Download |
![]() |
v1.0 | 2,502 KB | ![]() |
![]() |
v1.0 | 106 KB | ![]() |
![]() |
337 KB |
![]() |
|
|
1. Loosen four screws located on the back of SG05.
2. Push top-cover in the direction as shown gently and finally pull up to remove it from the SG05.
3. Loosen two screws located on 3.5” HDD tray and detach it gently.
4. Loosen six screws located near slim optical drive tray and detach it gently.
5. Loosen two screws near front I/O module and detach it gently.
6. Install USB 3.0 front I/O module (part number: G11303260) and secure with screws.
7. Assemble parts back in reverse order carefully. Your case is now USB3 ready.