SG05

■ 充裕的空间设计给CPU散热(散热器限高:82mm)

■ 加长型主板螺柱可支持主板背部装置组件

■ 首款搭配12公分风扇以正压差散热方式的小型化机箱

■ 支持2.5吋与3.5吋硬盘

■ 兼容于Mini-DTX/Mini-ITX主板与SFX电源

■ 内建80 PLUS认证的SFX 300W电源

■ 支持标准长度扩充卡(10吋)

备注

*Sugo SG05/SG06-小型化机箱的极致代表.
*SilverStone 80 PLUS電源供應器.


SG05 搭配9.5吋长 NVIDIA Geforce 8800GTS 512MB 于 PCIE 6pin

显卡长度参考:
  • ATI Radeon HD 5670 - 6.7"
  • ATI Radeon HD 5750 - 8.15"
  • ATI Radeon HD 4850/4830/5770 - 9"
  • ATI Radeon HD 5850 - 9.5"(ST45SF PSU recommended)
  • NVIDIA GeForce GTX 680 - 10"
  • NVIDIA GeForce 9800GT - 9"
  • NVIDIA GeForce 9600GT/GSO - 9"
  • NVIDIA GeForce 8800GS/GT/GTS - 9"
  • NVIDIA GeForce GTS 250 - 9"
  • NVIDIA GeForce GTX 460 - 8.25" (ST45SF PSU recommended)

 

规格

型号 SST-SG05B (黑)
SST-SG05W (白)
SST-SG05B-USB3.0 (黑)
SST-SG05W-USB3.0 (白)
材质 ABS强化塑料前面板, 0.6mm镀锌钢板机身
主板 Mini-DTX, Mini-ITX
磁盘架 外露 薄型光驱 x 1
--
隐藏 3.5” x 1 , 2.5” x 1
散热系统 1 x 120mm 进风风扇 1200rpm
--
侧边 大尺寸冲孔网
顶部 大尺寸冲孔网
底部 --
内部 --
扩展槽 2
前置 I/O USB 3.0 x 2 (SG05B-USB3.0, SG05W-USB3.0 only)
USB 2.0 x 2 (SG05B, SG05W only)
Audio x 1
MIC x 1
电源 80 PLUS 认证300W SFX 电源 (SilverStone tuned)
扩充卡 可相容于10" 长扩充卡 (254mm), 宽度限制-5.11" (129mm)*
处理器散热器限高 82mm
电源供应器深度限制 SFX
净重 3.52 kg
尺寸 222 mm (W) x 176 mm (H) x 276 mm (D), 10.8 公升

备注
CPU 散热器高度不可高过 82mm


Power supply type
SFX
最大DC供电
300W
颜色
SECC
负载范围
 
+3.3V +5V +12V1 +12V2 +5VSB -12V
最大电流 (安培数)
20A 22A 14A 16A 2.5A 0.5A
瞬间最大电流 (安培数)
/ / 19A 19A 3A /
最小电流 (安培数)
0.5A 0.5A 1A 1A 0A 0A
电压误差 (%)
+/-5% +/-5% +/-5% +/-5% +/-5% +/-5%
电压噪声 (mVp-p)
70mV 70mV 140mV 140mV 70mV 70mV
总+3.3V & +5V 输出
125W
总+12V输出
22A / 264W
输入电压
90V ~ 264V(自动调整)
输入频率
47Hz ~ 63Hz
主动式功率校正
主动式PFC (全载时PF>0.95)
操作温度
0 ~ 50°C
保护系统
过电流保护, 过负载保护, 过电圧保护, 短路保护.
接头
1 x 24-pin 主板接口(300mm)
1 x 4-pin ATX12V 接口(400mm)
1 x 6-pin PCI-E 接口(400mm)
6 x SATA 接口(300mm +200mm +100mm)
2 x 4-pin IDE 接口 (300mm + 200mm)
1 x软盘电源接口 (300mm + 200mm+ 200mm)
冷却系统
1 x 80mm 靜音风扇
尺寸规格
噪音
19 dBA 最小值
尺寸
125 mm (宽) x 63.5 mm (高) x 100 mm (深)
重量
940g
认证
80 PLUS
其它
GPU Support list
Compatible with ATX12V v2.4


● Specifications presented on this page contains most recent revisions and may differ from those printed on retail boxes or manuals.


电源尺寸和接口接口图
 




  • 文件下载
  • 推荐产品
  • 产品评测
  • 问与答


描述 版本 大小 下载
SG05 Multi Manual v1.0 2,502 KB
SG05 Power supply Manual v1.0 106 KB
SG05 eDM (CN-SG05B-EDM-U3.pdf)   802 KB

FPS01 12.7mm薄型光驱槽位用多功能前置面板 更多...
SDP08 Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. 更多...
FQ122 120mm ultra-quiet PWM fan 更多...
AR06 先进热导管直触薄型CPU散热器 更多...
NT06-PRO CPU cooler designed for SFF. 更多...
推荐之系统或准系统
The TFX 300W unit used in the SG05/SG06 was selected and tuned by SilverStone engineers for improved quietness and performance (300W continuous power at 50C). It has dedicated +12V rail for graphics card (16A, peak 19A) to provide more than enough power for any 9" long dual slot graphics cards. We actually do not recommend using off the shelf SFX PSUs at this time as they may not be designed to work well in the SG05/SG06 environment as we have done with the included unit.

As a reference, here is a list of components used in the SG05 development system:
Intel Core 2 Quad 9550 95W CPU
MSI IM-Q35 DO Industrial Mini-ITX motherboard
Corsair TWIN2X2048-6400C5DX DDR2 memory
*AMD Radeon HD4850 graphics card*
WD Raptor 150GB + VelociRaptor 300GB 10,000rpm hard drives
Slim Blu-ray drive
*The Radeon HD4850 was the highest powered card that can fit inside the SG05 at the time of development (more than NVIDIA GTS 250, which is a dual slot design.)


Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. 将SG05后方四颗螺丝拆除.
     

2. 依图示将上盖往后小心的移动再往上拉,将上盖卸除.
     

3. 将硬盘架的两颗螺丝卸下后,小心地拆除.
     

4. 将光盘架的六颗螺丝卸下后,小心地拆除.
     

5. 卸除固定USB模块的两颗螺丝,然后将旧模块小心地卸除.
     

6. 安装新的USB 3.0 模块(零件料号: G11303260),并将两颗固定螺丝小心地锁上.
     

7. 请依相反的步骤,将机壳小心地装回. 您的机壳现在已经升级至USB 3.0.