■ 正压差设计有效提升散热效能

■ 延续经典铁木真TJ07一体成型设计结构之极致工艺

■ 杰出的人体工学与极富艺术感的低调设计

■ 双18公分风扇设计提供杰出的散热效能与静音效果

■ 铆接极少化设计易于改装及扩充

■ 高弹性硬盘储存功能,可选配SATA热插拔接头


For more information about positive air pressure,
please refer to : what is positive air pressure
  FT01 can support 10.5” consumer level graphics cards.
The support for this type of cards does not require HDD cage to be removed.
    FT01 can support 12” workstation level graphics cards.
To support such long cards, the middle HDD cage must to be removed.

Graphic card length reference:
NVIDIA Quadro FX5600 / AMD FireGL V8600/8650 - 12"
NVIDIA GeForce GTX280/260 - 10.5“
NVIDIA GeForce 9800GTX/9800GTX+ - 10.5“
AMD Radeon HD 4870X2 - 10.5 "
NVIDIA GeForce 9800GT/9600GT/GTO - 9"
AMD Radeon HD 4870/4850 - 9 "
If an expansion card is longer than 10.5", the middle HDD cage needs to be removed, please refer to the Q&A section for more information.



型号 SST-FT01B (黑), SST-FT01B-USB3.0 (黑)
SST-FT01S (银), SST-FT01S-USB3.0 (银)
SST-FT01B-W (黑+ 开窗), SST-FT01B-W-USB3.0 (黑+ 开窗)
SST-FT01S-W (银+ 开窗), SST-FT01S-W-USB3.0 (银+ 开窗)
材质 3.0mm~6.0mm 一体成形铝框架与铝制机身
主机板 ATX, Micro-ATX
磁盘架 外露 5.25" x 5
隐藏 3.5" (兼容 2.5”) x 7
散热系统 1 x 180mm 进气风扇, 700rpm, 18dBA
1 x 120mm 排气风扇, 900rpm, 18dBA
侧边 --
顶部 1 x 180mm 进气风扇, 700rpm, 18dBA
底部 --
内部 --
扩展槽 7
前置 I/O USB 2.0 x 2 (仅 SST-FT01B, SSTFT01S, SST-FT01B-W, SST-FT01S-W)
USB 3.0 x 2 (仅 SST-FT01B-USB3.0, SSTFT01S-USB3.0, SST-FT01B-W-USB3.0, SST-FT01S-W-USB3.0)
IEEE1394 x 1
Audio x 1
MIC x 1
电源 可选配标准 PS2(ATX)
扩充卡 可兼容12" (304mm) 扩充卡,宽度限制 - 6.85" (173mm)
处理器散热器限高 170mm
电源供应器深度限制 无限制
净重 8.66kg
尺寸 211 mm (宽) x 496 mm (高) x 494.5 mm (深), 51.8 公升
其它 内附一组CP05可支持单组SATA硬盘热插拔功能,并可依需求另添购CP05使用

To enable SATA hot-swap function, you must have the following:

  1. Install SATA hard drive into drive holder with CP05
  2. Use motherboard or SATA card with AHCI function
  3. Enable AHCI function(please refer to your motherboard or SATA card manual)
  4. When installing OS(Windows XP SP2 or Vista), SATA drivers should be pre-loaded


  • 文件下载
  • 推荐产品
  • 产品评测
  • 问与答

描述 版本 大小 下载
FT01 Manual v1.0 2,984 KB
FT01 高分辨率照片 14,955 KB
FT01 eDM (CN-FT01-EDM-USB3.0.pdf)   1165 KB

CP05-SAS Convenient hot-swap SAS / SATA 6G connector. 更多...
CP07 SATA III线材内部包覆防电磁波的金属防护层及180度水平接头 更多...
FP55 Use FP55 to support one 3.5" and two 2.5" devices in a 5.25" drive bay. 更多...
FP58 5.25” drive bay for slot-loading slim optical drive and four 2.5” drives 更多...
AP182 Equip your SG09 with AP182 for crazy airflow. 更多...
AR07 高效静音热导管直触CPU散热器 更多...
HE01 Twin tower cooler for maximum cooling performance. 更多...
HE02 The ultimate heatsink with flexibility in nearly all applications. 更多...
Please refer to the FT01 180mm fan removal guide

180mm fan removal purposes:
- Upgrade original 180mm fan or for maintenance and replacement
- To gain access to the fan filter for the top mounted 180mm fan

1.Remove two screws located on the front 180mm fan bracket

2.Remove fan bracket

3.As shown in the photo, mounting holes circled in red are for 180mm fan while ones circled in blue are for 120mm fan

4.Place the case upside-down to facilitate in the removal of the first screw holding the top fan bracket

5.The second screw of the top fan bracket can be removed from behind the motherboard tray

6.The entire fan bracket assembly including the fan filter can now be removed by pulling it toward the front of the case
Please refer to the hard drive bracket removal guide
Hard drive bracket removal is optional for enabling more room for extra long expansion cards or when there are less than four hard drives installed.

From the case’s right side, remove the four screws holding the top hard drive bracket assembly

2. Then pull the top hard drive bracket assembly out from the left side

3. There are four screws for the lower hard drive bracket assembly that can be removed

4. Then pull out all hard drive racks from the lower hard drive bracket

5. With the racks removed, two screws holding the lower hard drive bracket to the bottom of the case can now be accessed and removed as well

6. The lower hard drive bracket can now be pulled out

Currently more advanced motherboards come with either manual or automatic fan control. Under these circumstances, when the CPU temperature is low, the motherboard can lower fan voltage output to slow the connected fans down; thereby lowering the fan noise.
The fans included in the FT01, especially the 180mm fans located on top and the front, are designed for very low noise even at full speed. The 180mm fans are rated at 700rpm maximum and have sound frequency far lower than most fans, making them practically unnoticeable in normal usage. However, due to their increased size and weight, coupled with lower maximum speed, they require higher average voltage to start than smaller fans.
If the 180mm fans in your FT01 are connected to the motherboard fan headers and are having trouble starting or spinning consistently, we recommend turning off or disabling fan voltage control (whether manual or automatic) in the motherboard BIOS options. The FT01’s highly optimized cooling performance may result in the motherboard sensing lower temperature and supplying lower fan voltage through its fan headers.
  1. Please unscrew the screws in the back panel as shown and remove both side panels.

  2. Please unscrews the screws in the side panel and take off the front bracket.

  3. Please unscrew the screws from inside the drive bay as shown.

  4. Finally you can take off the 5.25” plastic drive holder as shown.
Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.
  1. This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)
  2. This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.
This configuration affects all products with hot-swappable features including: KL series, FT series, RV series, and FP35.

Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.

LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. 将左后方三颗螺丝拆除后,小心地将左边侧版卸除.

2. 先将机壳倒立, 然后使用适合的螺丝起子卸除固定USB模块的两颗螺丝,然后将旧模块小心地卸除.

3. 安装新的USB 3.0 模块(零件料号: G11303500),并将两颗固定螺丝小心地锁上.

4. 请依相反的步骤,将机壳小心地装回.
     您的机箱现在已经升级至USB 3.0.