FP35

■ いずれの3.5”外側ドライブベイにも使用可能

■ SDHCカードに完全対応

■ USB, Firewire, eSATA, HDオーディオ (Azalia)の追加ポート

■ USB 2.0 (480Mビット)対応で最高速のデータ転送

■ +12V/+5V DC出力で、ACアダプタのない3.5”外付けストレージに対応*

備考

* 付属の電源ケーブルは、+12V 6.4mmタイプ、ミニ6Dinおよびミニ4Dinタイプです。

 

製品仕樣

型番 SST-FP35B
材質 SECC
カラー ブラックおよび交換用シルバーフロントパネル
寸法(ハンドルバーだけ) 101.6mm (W) x 25.4mm (H) x 140mm (D)
フロント I/O ポート 1 x USB, 1 x 1394, 1 x オーディオ (Azalia), 1 x MIC (Azalia) , 1 x eSATA, 1 x +12V/+5V出力
インターフェース USB 2.0 (480Mbps)
メディアカード USB電力供給
メディアカード サポート XD / CF I / CF II / MD /CF-Ultra II / CF Extreme /Micro Drive /UDMA CF / SD / SDHC / MMC / MMC II / MMC 4.0 /MMC Micro(w/ adapter*)/ RS MMC / HS MMC / Mini SD(要アダプタ*) / SD-Ultra II / T-Flash(要アダプタ*) / Micro SD(要アダプタ*)/ MS / MS PRO / MS Duo / MS PRO Duo(MG) / MS PRO(MG) / MS(MG) / HS MS PRO(MG) / HS MS PRO DUO(MG) / MS PRO Ultra II / Memory Stick Micro ( M2 ) (要アダプタ*
オペレーティングシステムサポート Windows 98, Me, 2000, XP, Vista, Mac OS 9.x / X, Windows 7
重量 390 g
備考 :
  *Windows 98/me requires driver installation(downloadable from download section)

 




  • ダウンロード
  • おすすめ製品
  • 製品 レビユー
  • Q&A


Describe Ver サイズ ダウンロード
FP35 Manual v1.0 2,111 KB
Driver for Windows 98/me v1.0 2,625 KB
FP35 High resolution photos 332 KB
FP35 eDM (JP-FP35B-100dpi.jpg)   354 KB

CW03 Premium standard ATX HTPC chassis その他...
TJ10 Flagship-level extended ATX tower chassis その他...
Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.
  1. This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)
  2. This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.
This configuration affects all products with hot-swappable features including: KL series, FT series, RV series, and FP35.
  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.

  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.