首页 > >




     



         

 
 


CP13
180度延伸SATA硬盘线材组 更多...
NT06-PRO
CPU cooler designed for SFF. 更多...
FT04
散热动力学,新指标. 更多...
GD10
HTPC case supports ATX motherboard and lockable front door. 更多...
PM01
引领风格与性能的计算机机箱 更多...
PM01-RGB
引领卓越风格与性能的计算机机箱 更多...
PS14
极简的分层散热ATX超值机箱 更多...
推荐之系统或准系统
ASrock C2750D4I 更多...
ASUS Xonar HDAV1.3 Deluxe 更多...
MSI Radeon RX 460 4GT LP 更多...
 
 
描述
版本
大小
下载


本产品尚未有可供下载之项目

A:Please check and see if the connector wire behind the VFD is touching the solder points behind the circuit board. If so, please separate them by taping the wire down or place non-conductive material in between the wires and the circuit board.

A:Both Windows XP and Vista 64-bit will recognize the card reader automatically and self-install driver for it.

A:Both Windows XP and Vista 64-bit will recognize the card reader automatically and self-install driver for it.

A:

If your computer is tripping the circuit breaker that means it is drawing too much power from one outlet. Please do the following:

1. Please make sure the computer is plugged directly into the wall outlet and do not use extension socket or other multiple outlet extension cords with the computer.

2. If the use of extension socket is necessary, avoid combined usage with other higher powered household appliances such as TV, audio amplifier, etc…

3. Contact your local electrician for information on how you can upgrade your house to accommodate higher electrical draw.

A:此款机种采用的喷漆类型,特征为细小的凸点起伏。相较其他烤漆方式,拥有较为耐脏、耐指纹、耐刮的特性。

A:Before you turn on the PC please make sure the power connector from your system hard drive is isolated from the power connector connected to the hard drive you wish to hot-swap. Both connectors should be on different cables from the power supply.

  1. This is the correct IDE/SATA power connector configuration. Please refer the picture as shown. (A is your system hard drive, B is your hot-swap hard drive)
  2. This is the incorrect IDE/SATA power connector configuration where both drives are being powered by the same cable from the power supply.
This configuration affects all products with hot-swappable features including: KL series, FT series, RV series, and FP35.

A:

  1. When you are finished using your media cards (SD, CF, MS and SM etc), simply pull them out from the FP34/FP35.



  2. Please don’t use the “safely remove hardware” command as you do with normal USB devices. If you use the “safely remove hardware” command from the system tray icon, the FP34/FP35 card reader function will be disabled until you restart your system.

A:

Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

A:

Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.


LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.

KL series Power LED installation guide:
Please connect this peripheral connector from the case to your power supply.

A:如果您是把风扇插头是插在主板上。建议您可以先将主板BIOS的风扇温控功能关掉。如果您想利用主板的温控功能,建议您应该把风扇的转速切到 高转,以得到更低的启动电压与更大的控制范围。如果无论如何风扇都不会运转,请尽速联络购买处,处理换货事宜。

A:可能不会过热,但是以噪音效能相比而言,将风扇安装在CPU Cooler上会比安装在后抽风扇更有效率。

A:RV04的风道是经过高度最佳化的,以正压差平行的气流来达成散热。以前置两颗180mm风扇而言,会平均分配给CPU与显示卡区块。经我们测试,在后方加装风扇会造成气流不均衡,进而降低了CPU温度,而显示卡温度却提升了;即使不安装风扇,空气依然会由后方的排空孔自然排出。而以带风扇的塔型CPU Cooler而言,我们测试过将风扇安装于Cooler上与机壳后方的差异。在机壳后方由于风扇比较外露,在加上网孔的因素;噪音量比起只在CPU Cooler安装风扇还要大声许多。由测试结果来看,后抽风扇是没必要的。而这个风扇安装槽是设计给有需要安装简便一体式水冷用的。

A:为了把RV04的静音尽可能做到完美,我们对前方的风扇没有做任何护网,以避免增加风切声。因此在开机状态下移除滤网,有可能会让异物碰到正在运转的扇叶。所以我们建议您先关机再清理滤网。

A:如果您是把风扇插头插在主机板上。建议您可以先将主机板BIOS的风扇温控功能关掉。如果您想利用主机板的温控功能,建议您应该把风扇的转速切到高转,以得到更低的启动电压与更大的控制范围。如果无论如何风扇都不会运转,请尽速联络购买处,处理换货事宜。

A:RV04机壳有支持安全缆线锁的功能。使用安全缆线锁除了降低整台计算机被搬走的可能,同时避免机壳内的组件被盗走。如果上盖可以另外拆除,那么将会提高您计算机失窃的风险。

A:可能不会过热,但是以噪音效能相比而言,将风扇安装在CPU Cooler上会比安装在后抽风扇更有效率。

A:1X120的水冷排可以安装在上方;超过这规格我们建议安装在机壳下方。

A:可以。但开机时抽出滤网后就暂时没有滤网保护,为避免异物触碰或损伤运转中的风扇,我们建议尽量缩短您的作业时间。

A:如果您考虑在前方安装一个3X120风扇规格的水冷排,我们建议您可以考虑Magicool Dual 180 Radiator。虽然长度一样,但是从面积算上来2X180 水冷排比3X120多了足足有50%,可以提供更大的冷却效能。

A:请先进入控制面板\所有控制面板项目\电源选项\编辑计划设定,选择变更进阶电源设定中的电源选项进阶设定,选择USB设定下挂的”USB选择性暂停设定”选项。而后下拉到电池使用中与一般电源,请切换至已停用。

A:     相较一般普通的Micro-B接头,正反插的Micro-B接头需要稍微更用力,才能完全插入手机的Micro-B USB接口,此时应有明显的「卡扣」触感。

A:1.请了解您手机接收线圈的位置,再对准本产品的感应区中间。
2.请检查是否开机、行动电源是否有电。

A:充电时,产生温度是正常现象。购买接收装置时,请注重质量。 接收片质量会直接影响到充电效率、速度、产生温度多寡。建议使用手机原厂接收装置。

A:1.本产品有金属异物侦测,请排除金属异物。
2.本产品有效率过低侦测,请对准感应区中间或更换接收装置。

A:充电电流大小取决于接收装置及手机可提供充电电流的大小。

A:请确保外接电源有5V/1A的能力,以免功能异常或充电速度太慢。
请勿靠近火源和浸泡于水中。

A:大多数情况是可以的,但或许会因之前的使用环境不同,导致可能无法兼容。因此为了避免无法预料的数据损失,请确实在使用前 先备份数据

A:此产品支持2.5英寸 SATA / SAS HDD / SSD,但并不支持 IDE、SCSI 硬盘

A:当您进行格式化时,可以选择快速格式化,以缩短时间

A:本产品在充电时,不可再使用本产品充其他装置。

A:

The TS03 supports slim optical drive to reduce the depth required in the 5.25” optical drive bay. It can increase the space for CPU cooler in the GD05. The limitations of installing NT06-E into the GD05 are as follow:

  1. Horizontal orientation of CPU cooler on the motherboard.


    The distance from CPU to motherboard edge.
    55.5mm<x<68mm
    69.5mm<y<89mm


  2. Vertical orientation of CPU cooler on the motherboard.

The distance from CPU to motherboard edge.
59.5mm<x<96.5mm
98mm<y<117.5mm

The above limitations apply only if graphics card is installed in the first expansion slot and with rear 80mm fans installed.
If fans are removed, y distance decreases by 25mm
If graphics card is installed in the second expansion slot, the x distance increases by 20mm

Installation guide

  1. Install the NT06-E on the motherboard.



  2. Insert a slim optical drive into the TS03.


  3. Install the motherboard into the chassis.




  4. Install and secure the TS03 in the 5.25” drive bay.



  5. Connect the wires and cables to the TS03.



  6. Install a 120mm fan over the NT06-E as needed.

A:There are two main types of heat pipes used in popular aftermarket coolers, they are groove and powder. Groove heat pipes are very susceptible to gravity while powder heat pipes are less so. To achieve best performance in either heat pipe technology, they need to be placed horizontally or have the heat source side located below the other end of the heat pipe. We recommend choosing and installing components with heat pipes carefully by taking into consideration of the following examples:

Motherboard:

The orientation of an enthusiast motherboard in a normal ATX case


The orientation of an enthusiast motherboard in the

As the illustrations above show, most enthusiast motherboards with heat pipes will work fine in the , the heat source is located below other parts of the heat pipe.
CPU cooler:
Horizontal style cooler


Good orientation Good orientation Bad orientation


Many CPU coolers can be rotated when installing on motherboards, the illustration here shows a SilverStone NT06-E

VGA cooler


The illustration here shows a VGA cooler that will not work well in the because the heat source side (touching the GPU) ends up being located higher than the other end.

A:RV02B-W v1.7 and after
FT02B v1.4 and after
FT02S v1.4 and after
FT02B-W v1.7 and after

A:

1. 请使用双手将上盖往上小心地卸除.
     

2. 将四颗螺丝拆除后,小心地将左右两边侧版卸除.
     

3. 将前面版后方六颗螺丝拆除后,小心地将前面版卸除.
     
     

4. 请先将机壳上前盖的两颗螺丝拆除,然后依图示将上前盖往前小心的移动再往上拉,将上前盖卸除.
     

5. 将上前盖反过来卸除固定USB模块的两颗螺丝,然后将旧模块小心地卸除.
     

6. 安装新的USB 3.0 模块(零件料号: G11303260),并将两颗固定螺丝小心地锁上.
     

7. 请依相反的步骤,将机壳小心地装回.
    您的机壳现在已经升级至USB 3.0.
     

A:There is a power switch located directly on SG08's power supply and it maybe in the "off" position. The switch is located next to the power cord connector on the power supply, please check it and make sure it is in the "on" position.

A:这必须依您的屏幕重量及屏幕后的壁挂孔位而定。多数人误以为屏幕大小是决定是否能使用屏幕架的关键,事实上屏幕重量还有壁挂孔位才是重点。屏幕重量影响屏幕架的结构是否足够坚固去支撑您的屏幕,而屏幕后的壁挂孔位要符合屏幕架的壁挂孔位才有办法将屏幕挂载上去。