TJ10

■ Telaio in alluminio di qualità superiore per schede ATX, ATX, SSI estese

■ Ventola da 120mm esclusivamente progettata per performance superiori e silenziose

■ Condotto d’aria senza precedenti per il raffreddamento delle cards grafiche

■ Avanzata ingegneria strutturale e rigidezza superiore del telaio

■ Facile da utilizzare con molteplici accessi senza strumenti

■ Stile classico della SilverStone

Osservazioni

TJ10 outfitted with AMD QuadFX platform and 12" long Leadtek Quadro FX 5600 1.5GB GDDR3 in SLI

   

TJ10 outfitted with AMD FX platform and 12" long Diamond Radeon HD 2900XTX 1GB GDDR4 (OEM version) in CrossFire

Graphic card length reference:

  NVIDIA Quadro FX5600 / AMD FireGL V8600/8650 - 12"
NVIDIA GeForce GTX280/260 - 10.5"
NVIDIA GeForce 9800GTX/9800GTX+ - 10.5"
AMD Radeon HD 4870X2 - 10.5"
NVIDIA GeForce 9800GT/9600GT/GTO - 9"
AMD Radeon HD 4870/4850 - 9"

 

Specifiche

Modello nr. SST-TJ10B (nero), SST-TJ10B-USB3.0 (nero)
SST-TJ10S (silver)
SST-TJ10B-W (nero,con finestra), SST-TJ10B-W-USB3.0 (nero,con finestra)
SST-TJ10S-W (silver,con finestra)
Materiale Pannello frontale in alluminio, corpo in alluminio da 2.0mm
Scheda madre SSI-EEB, Extended ATX, ATX, Micro-ATX
Alloggiamento Esterno 5.25” x 4
3.5” x 1
Interno 3.5” x 6
Sistema di raffreddamento Frontale 1 slot della ventola da 120mm
Posteriore 1 x ventola d’emissione da 120mm, 1200rpm, 21dBA
Laterale 1 x ventola d’emissione da 120mm, 1200rpm, 21dBA
Superiore 2 x slot della ventola da 120mm
Inferiore --
Interno --
Supporto radiatore Frontale N/A
Posteriore 120mm x 1
Superiore 120mm x 2 (require RADSUPPORT09)
Inferiore N/A
Slot d 7
porte frontali d'entrata/uscita USB 2.0 x 2 (SST-TJ10B, SST-TJ10S, SST-TJ10B-W, SST-TJ10S-W only)
USB 3.0 x 2 (SST-TJ10B-USB3.0, SST-TJ10B-W-USB3.0 only)
IEEE1394 x 1
audio x 1
MIC x 1
Alimentatore 1 x Optional standard PS2(ATX) or 1 x Redundant PS2
Card grafiche Può accogliere schede di espansione lunghe fino a 12" (304mm), Limitazione della larghezza- 6,81" (172mm)
Limite del dissipatore della CPU 169mm
Limitazione di PSU Unlimited
Peso netto 13 kg
Dimensioni 207 mm (L) x 521 mm (A) x 644 mm (S), 69.5 litri
Extra TJ10 NVIDIA Edition

Osservazioni
  To build your water cooling system, we recommend equip your TJ10 with RADSUPPORT09 to install a 120x2 radiator in TJ10.
 

 




  • Downloads
  • Raccomandazioni
  • Recensioni Sull'articolo
  • Domande e Risposte


Describe Ver Taglia Download
TJ10 manual v1.0 4,442 KB

FP35 Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. altro...
SDP08 Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. altro...
FN121-BL Equip your TJ10 with FN121-BL for added lighting effect in available 120mm fan slots. altro...
FQ122 120mm ultra-quiet PWM fan altro...
AR07 Dissipatore di calore altamente avanzato con tecnologia HDC (Heat-pipe Direct Contact) altro...
FS303 Due 5,25" vani per i dispositivi a tre 3,5" SAS / SATA 6 Gbit / s HDD / SSD hot-swap gabbia senza vassoio. altro...
FS305-12G Tre 5,25" vani per i dispositivi a cinque 3,5" SAS 12G / SATA 6 Gbit/s HDD / SSD hot-swap gabbia senza vassoio altro...
NT06-PRO CPU cooler designed for SFF. altro...
ST1200-PT Il perfetto equilibrio di prestazioni, efficienza e qualità altro...
Recommended system / barebone


Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. After loosening three screws, detach left side panel gently.
     

2. Use allen wrench to loosen four screws and detach front I/O unit from case gently.
     
   For earlier versions of TJ10, please loosen four screws from inside the case to detach the front I/O unit.
     

3. Loosen two screws located on the back of front I/O unit.
     

4. Loosen two screws on both side of front I/O unit.
     

5. Loosen four screws near front I/O module and detach it gently.
     

6. Install USB 3.0 front I/O module (part number: G11303500) and secure with screws.
     

7. Install new aluminum front I/O cover (part number: SILVER: G10106112 / Black : G10106122 ) and secure with screws. Assemble other parts back in reverse order carefully.
     Your case is now USB3 ready.