TJ10

■ Chasis en alluminio de calidad superior para placas ampliadas ATX, ATX, SSI

■ Ventilador de 120mm disenado exclusivamente para prestaciones superiores y silenciosas

■ Conducto de aire sin precedentes para refrigeración de las tarjetas gráficas

■ Ingenería estructural avanzada y extra rigidez del chasis

■ Uso sencillo para los usuarios con accesos múltiplos sin utilizo de herramienta

■ Estilo clásico de SilverStone

Recordatorio

TJ10 outfitted with AMD QuadFX platform and 12" long Leadtek Quadro FX 5600 1.5GB GDDR3 in SLI

   

TJ10 outfitted with AMD FX platform and 12" long Diamond Radeon HD 2900XTX 1GB GDDR4 (OEM version) in CrossFire

Graphic card length reference:

  NVIDIA Quadro FX5600 / AMD FireGL V8600/8650 - 12"
NVIDIA GeForce GTX280/260 - 10.5"
NVIDIA GeForce 9800GTX/9800GTX+ - 10.5"
AMD Radeon HD 4870X2 - 10.5"
NVIDIA GeForce 9800GT/9600GT/GTO - 9"
AMD Radeon HD 4870/4850 - 9"

 

Especificaciones

Modelo No. SST-TJ10B (negro), SST-TJ10B-USB3.0 (negro)
SST-TJ10S (plata)
SST-TJ10B-W (negro, con ventana), SST-TJ10B-W-USB3.0 (negro, con ventana)
SST-TJ10S-W (plata, con ventana)
Material Panel frontal de aluminio, cuerpo en aluminio de 2.0mm
Placa Madre SSI-EEB, Extended ATX, ATX, Micro-ATX
Bahías Externas 5.25” x 4
3.5” x 1
Internas 3.5” x 6
Refrigeración Frente 1 x ranura del ventilador de120mm
Parte posterior 1 ventilador de salida de 120mm, 1200rpm, 21dBA
Lado 1 ventilador de entrada 120mm, 1200rpm, 21dBA
Tapa 2 ranuras del ventilador de 120mm
Parte inferior --
Interno --
Refrigeración aceptada Frente N/A
Trasera 120mm x 1
Tapa 120mm x 2 (require RADSUPPORT09)
Parte inferior N/A
Slots de Expansión 7
Puertos USB 2.0 x 2 (SST-TJ10B, SST-TJ10S, SST-TJ10B-W, SST-TJ10S-W only)
USB 3.0 x 2 (SST-TJ10B-USB3.0, SST-TJ10B-W-USB3.0 only)
IEEE1394 x 1
audio x 1
MIC x 1
Fuente de Alimentación 1 x Optional standard PS2(ATX) or 1 x Redundant PS2
Gráficos Tarjeta Acepta tarjetas gráficas de 12" (304mm), restricción de anchura – 6,81" (172mm)
Limitación del disipador de la CPU 169mm
Limitación de Fuente de alimentación Unlimited
Peso 13 kg
Dimensiones 207 mm (L) x 521 mm (A) x 644 mm (G), 69.5 litros
Adicional TJ10 NVIDIA Edition

Recordatorio
  To build your water cooling system, we recommend equip your TJ10 with RADSUPPORT09 to install a 120x2 radiator in TJ10.
 

 




  • Descargas
  • Recomendaciones
  • Reseña del producto
  • P y R


Describe Ver tamaño Descarga
TJ10 manual v1.0 4,442 KB

FP35 Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. Más...
SDP08 Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. Más...
FN121-BL Equip your TJ10 with FN121-BL for added lighting effect in available 120mm fan slots. Más...
FQ122 120mm ultra-quiet PWM fan Más...
AR07 Disipador muy avanzado con tecnología HDC (Contacto Directo de Tubos Isotérmicos) Más...
FS303 Dos bahías de unidades de 5,25" para tres armazones de discos duros de 3,5" SAS/SATA 6 GB hot-swap HDD/SSD sin bandeja. Más...
NT06-PRO CPU cooler designed for SFF. Más...
ST1200-PT El equilibrio perfecto de rendimiento, eficiencia y calidad. Más...
Recommended system / barebone


Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. After loosening three screws, detach left side panel gently.
     

2. Use allen wrench to loosen four screws and detach front I/O unit from case gently.
     
   For earlier versions of TJ10, please loosen four screws from inside the case to detach the front I/O unit.
     

3. Loosen two screws located on the back of front I/O unit.
     

4. Loosen two screws on both side of front I/O unit.
     

5. Loosen four screws near front I/O module and detach it gently.
     

6. Install USB 3.0 front I/O module (part number: G11303500) and secure with screws.
     

7. Install new aluminum front I/O cover (part number: SILVER: G10106112 / Black : G10106122 ) and secure with screws. Assemble other parts back in reverse order carefully.
     Your case is now USB3 ready.