■ Premium all-aluminum chassis for extended ATX, ATX, SSI motherboards

■ 120mm fan only design for ultimate performance & quietness

■ Unprecedented air duct dedicated for graphics card cooling

■ Advanced structural engineering with superior chassis stiffness

■ User friendly layout with multiple tool-less access

■ Classic SilverStone styling and finish


TJ10 outfitted with AMD QuadFX platform and 12" long Leadtek Quadro FX 5600 1.5GB GDDR3 in SLI


TJ10 outfitted with AMD FX platform and 12" long Diamond Radeon HD 2900XTX 1GB GDDR4 (OEM version) in CrossFire

Graphic card length reference:

  NVIDIA Quadro FX5600 / AMD FireGL V8600/8650 - 12"
NVIDIA GeForce GTX280/260 - 10.5"
NVIDIA GeForce 9800GTX/9800GTX+ - 10.5"
AMD Radeon HD 4870X2 - 10.5"
NVIDIA GeForce 9800GT/9600GT/GTO - 9"
AMD Radeon HD 4870/4850 - 9"



Model No. SST-TJ10B (black), SST-TJ10B-USB3.0 (black)
SST-TJ10S (silver)
SST-TJ10B-W(black, with window), SST-TJ10B-W-USB3.0(black, with window)
SST-TJ10S-W(silver, with window)
Material Aluminum front panel/door, 2.0mm aluminum body
Motherboard SSI-EEB, Extended ATX, ATX, Micro-ATX
Drive bay External 5.25” x 4
3.5” x 1
Internal 3.5” x 6
Cooling system Front 1 x 120mm fan slot
Rear 1 x 120mm exhaust fan, 1200rpm, 21dBA
Side 1 x 120mm mid-section fan, 1200rpm, 21dBA
Top 2 x 120mm fan slots
Bottom --
Internal --
Radiator support Front N/A
Rear 120mm x 1
Top 120mm x 2 (require RADSUPPORT09)
Bottom N/A
Expansion slot 7
Front I/O port USB 2.0 x 2 (SST-TJ10B, SST-TJ10S, SST-TJ10B-W, SST-TJ10S-W only)
USB 3.0 x 2 (SST-TJ10B-USB3.0, SST-TJ10B-W-USB3.0 only)
IEEE1394 x 1
audio x 1
MIC x 1
Power supply 1 x Optional standard PS2(ATX) or 1 x Redundant PS2
Expansion card Compatible up to 12" (304mm) long, width restriction-6.81" (172mm)
Limitation of CPU cooler 169mm
Limitation of PSU Unlimited
Net weight 13 kg
Dimension 207 mm (W) x 521 mm (H) x 644 mm (D), 69.5 liters
8.15" (W) x 20.51" (H) x 25.35" (D), 69.5 liters
Extra TJ10 NVIDIA Edition

  To build your water cooling system, we recommend equip your TJ10 with RADSUPPORT09 to install a 120x2 radiator in TJ10.


  • Q&A

Describe Ver Size Download
TJ10 manual v1.0 4,442 KB
TJ10 eDM (EN-TJ10-U3.jpg)   305 KB

FP35 Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. more...
SDP08 Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more...
FN121-BL Equip your TJ10 with FN121-BL for added lighting effect in available 120mm fan slots. more...
FQ122 120mm ultra-quiet PWM fan more...
AR07 Highly advanced heatsink with Heat-pipe Direct Contact (HDC) technology more...
FS303 Two 5.25" device bay to three 3.5" SAS/SATA 6.0 Gbit/s trayless hot-swap cage more...
FS305-12G Three 5.25" device bay to five 3.5" SAS-12G / SATA-6Gbit/s trayless hot-swap cage more...
NT06-PRO CPU cooler designed for SFF. more...
ST1200-PT The perfect balance of performance, efficiency, and quality more...
Recommended system / barebone

Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.

LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. After loosening three screws, detach left side panel gently.

2. Use allen wrench to loosen four screws and detach front I/O unit from case gently.
   For earlier versions of TJ10, please loosen four screws from inside the case to detach the front I/O unit.

3. Loosen two screws located on the back of front I/O unit.

4. Loosen two screws on both side of front I/O unit.

5. Loosen four screws near front I/O module and detach it gently.

6. Install USB 3.0 front I/O module (part number: G11303500) and secure with screws.

7. Install new aluminum front I/O cover (part number: SILVER: G10106112 / Black : G10106122 ) and secure with screws. Assemble other parts back in reverse order carefully.
     Your case is now USB3 ready.