GD05
￭ Tre ventole silenziose da 120mm incluse
￭ Sistema di raffreddamento interno a pressione positiva per un eccellente rapporto efficienza/silenziosità e per evitare accumuli di polvere.
￭ Profondità di soli 325mm per adattarsi a qualsiasi struttura per home theater
￭ Disegnato con ampi spazi per la sistemazione dei cavi
￭ Supporta alimentatori lunghi fino a 180mm
￭ Supporta schede di espansione lunghe fino a 28cm
￭ Supporta due hard disk da 2,5” o SSD (Solid-state drive)
Osservazioni
Graphic card length reference:
AMD Radeon HD 5870 11"
NVIDIA GeForce GTX295/280/260/275 - 10.5"
NVIDIA GeForce 9800GTX/9800GTX+ - 10.5"
AMD Radeon HD 4870X2 - 10.5"
AMD Radeon HD 5850 - 9.5"
NVIDIA GeForce 9800GTX/9600GT/GTO - 9"
AMD Radeon HD 4870/4850 - 9"
Specifiche
| Modello nr. |
SST-GD05B(Nero) SST-GD05B-USB3.0(Nero) |
|
| Materiale | Frontale in materiale plastico rivestito in alluminio, chassis SECC da 0.8mm | |
| Scheda madre | Micro-ATX, Mini-DTX, Mini-ITX | |
| Alloggiamento | Esterno | 5.25" x 1 |
| -- | ||
| Interno | 3.5" x 2 , 2.5” x 1 or 3.5" x 1 , 2.5” x 2 | |
| Sistema di raffreddamento | Frontale | -- |
| Posteriore | 2 slot per ventole da 80mm (opzionali) | |
| Laterale | Right: 2 ventole di immissione da 120mm, 1200rpm, 20dBA Left: 1 ventola di immissione da 120mm, 1200rpm, 20dBA Compatibile anche con ventole da 80mm |
|
| Superiore | -- | |
| Inferiore | -- | |
| Interno | -- | |
| Slot d | 5 | |
| porte frontali d'entrata/uscita | USB 2.0 x 2 (GD05B only) USB 3.0 x 2 (GD05B-USB3.0 only) audio x 1 MIC x 1 |
|
| Alimentatore | Supporta standard PS2(ATX) | |
| Card grafiche | Può accogliere schede di espansione lunghe fino a 11" (279mm), Limitazione della larghezza- 4,92" (124mm) | |
| Limite del dissipatore della CPU | 70mm (remove ODD if you want install up to 120mm) | |
| Limitazione di PSU | 180mm (remove Left fan replacement as 80mm if you want install up to 220mm) | |
| Peso netto | 4.7kg | |
| Dimensioni | 440 mm (W) x 151 mm (H) x 325 mm (D), 21.6 litri | |
| Extra | support Kensington lock (v1.4 or after) | |
 |
PICTURES
- Downloads
- Raccomandazioni
- Recensioni Sull'articolo
- Domande e Risposte
| Describe | Ver | Taglia | Download |
 GD05 Manual |
v1.0 | 5,533 KB |  |
| GD05 High resolution photos |
811 KB | |
|
|
GD05 eDM (IT-GD05-EDM-USB3.0.pdf)
|
525 KB |
|
|
|
The TS03 supports slim optical drive to reduce the depth required in the 5.25” optical drive bay. It can increase the space for CPU cooler in the GD05. The limitations of installing NT06-E into the GD05 are as follow：
- Horizontal orientation of CPU cooler on the motherboard.
The distance from CPU to motherboard edge.
55.5mm<x<68mm
69.5mm<y<89mm
- Vertical orientation of CPU cooler on the motherboard.
The distance from CPU to motherboard edge.
59.5mm<x<96.5mm
98mm<y<117.5mmThe above limitations apply only if graphics card is installed in the first expansion slot and with rear 80mm fans installed.
If fans are removed, y distance decreases by 25mm
If graphics card is installed in the second expansion slot, the x distance increases by 20mm
Installation guide
- Install the NT06-E on the motherboard.
- Insert a slim optical drive into the TS03.
- Install the motherboard into the chassis.
- Install and secure the TS03 in the 5.25” drive bay.
- Connect the wires and cables to the TS03.
- Install a 120mm fan over the NT06-E as needed.
1. Loosen three screws located on the back of GD05 and detach top-cover gently.
2. Loosen four screws located on hard drive bracket and detach it gently.
3. Loosen two screws near front I/O module and detach it gently.
4. Install USB 3.0 front I/O module (part number: G11303260) and secure with screws.
5. Assemble parts back in reverse order carefully. Your case is now USB3 ready.
