Legacy Products

Computer Chassis

 

KL04

INTRODUCTION

When the first Kublai series chassis was introduced in 2007, it had innovative storage design that was ahead of its time. For the Kublai KL04, SilverStone engineers again looked to raise the bar with a design that can accommodate four 5.25" drive bays, nine 3.5" hard drives, and up to six 2.5" SSDs. This astonishing amount of storage capacity for a mid-tower chassis is unprecedented and comes with no compromise to compatibility. Expansion cards or graphics cards up to 17 inches (431mm) long can be installed without the need to remove hard drive cage and even with all hard drive bays filled, cards up to 12.8 inches (325mm) can still be used. To cope with densely packed hard drive bays, repeated thermal tests and revisions were made to come up with an airflow layout that is capable of handling all hard drives installed without negatively affecting the rest of the system. The right front positioning of the intake fans also helps to divert noise from leaking out directly to the front of the chassis. For 2.5" SSD or HDD mountings, the KL04 has specially designed cages that can be mounted in two locations depending on user needs. If you are looking for a chassis with server-like room for expansion but only limited footprint for a mid-tower, the KL04 is the choice.



SPECIAL FEATURES

  • Incredible ten 3.5" hard drive capacity
  • Flexible multi 2.5" drive slots
  • Beautiful SilverStone-styled front panel free of venting holes
  • Positive pressure design for effective dust reduction
  • Motherboard back plate opening for quick CPU cooler assembly
  • Support eight expansion slots cards up to 17 inches (431mm) long
  • Quick access and removal for fan filters
  • Smart backside cable routing design


    Download :
  • KL04 Manual


  • SPECIFICATIONS

    Model No. SST-KL04B (black)
    SST-KL04B-W(black+window)
    Material Plastic front panel, steel body
    Motherboard SSI-CEB, ATX (up to 12" x 10.9"), Micro-ATX
    Drive bay External 5.25" x 4
    3.5" x 1 (compatible with hard drive)
    Internal 3.5" x 9 (optional 3.5" x 8 + 2.5" x 1), 2.5" x 6
    Cooling system Front --
    Rear 1 x 120mm exhaust fan, 1200rpm, 21dBA
    Side Right:1 x 120mm intake fan, 1200rpm, 21dBA
    Right:1 x 120mm fan slot (optional)
    Top 1 x 120mm intake fan, 1200rpm, 21dBA
    1 x 120mm or 140mm fan slot (optional)
    Bottom 1 x 120mm fan slot (optional)
    Internal --
    Radiator support Front N/A
    Rear 120mm x 1
    Top 120mm x 1 / 240mm x 1
    Bottom N/A
    Expansion slot 8
    Front I/O port USB 3.0 x 2 (backwards compatible with USB 2.0)
    audio x 1
    MIC x 1
    Power supply Standard PS2(ATX)
    Expansion card *Compatible up to 17" (431mm) long, width restriction-6.14" (155mm)
    Limitation of CPU cooler 168mm
    Limitation of PSU **Unlimited
    Net weight 8.2kg
    Dimension 214mm(W) x 489mm(H) x 499mm(D), 52.2 liters
    8.43" (W) x 19.25" (H) x 19.65" (D), 52.2 liters
    Extra Support Kensington locks

    Remark
    *If hard drive is installed in front of the cards, the length limitation is 12.8 inches (325mm)
    **If bottom fan or 2.5" SSD is installed, the maximum depth for PSU is 180mm (or 160mm with extra cabling room), otherwise there are no depth limitations