Legacy Products

Power Supplies

 

ST75F-G-E

INTRODUCTION

To make great power supplies even better, SilverStone engineers delved into the details with the Strider Gold series. In order to reduce the already low noise generated by the Strider Gold, they replaced the fan with SilverStone’s own Air Penetrator , which has superb cooling ability and is equipped with fluid dynamic bearing. This allowed for reprogramming of the fan controller to enable lower fan speed at any given loading condition compared to the predecessor. Various components were also re-tested and replaced with newer versions for minor boost in efficiency and performance. An excellent FF141 fan filter with magnets is even included in the package for use to reduce dust buildup. With the fan and component upgrades, the Strider Gold Evolution series will again encompass wattage range from 750W to 1200W with 80 PLUS Gold level efficiency, ±3% voltage regulation, ±3% ripple & noise, and high amperage single +12V rail as its main features. For discerning users looking to get a top-notch power supply with all features covered and more, this is the perfect solution.



SPECIAL FEATURES

  • 80 PLUS Gold certification with high efficiency 88%~91% at 20%~100% loading
  • Ultra silent 139mm Air Penetrator fan with fluid dynamic bearing
  • FF141 magnetized fan filter included
  • 100% modular cables
  • 750W (850W peak power) 24hour fully continuous power output with 40℃ operating temperature
  • Class-leading single +12V rail with 62A
  • Strict ±3% voltage regulation and low ripple & noise
  • Japanese main capacitors
  • Dual EPS 8pin with multiple PCI-E 8pin and PCI-E 6pin connectors support
  • Supports ATX 12V 2.3 & EPS 12V



  • Download :
  • ST75F-G Evolution Manual


  • SPECIFICATIONS

    Model No.
    SST-
    Max. DC Output
    750W (Peak 850W)
    Power density
    323W per liter
    Load Range
     
    +3.3V +5V +12V +5VSB -12V
    Max.(Amps)
    22A 25A 62A 3.5A 0.3A
    Min.(Amps)
    0.3A 0.3A 0.1A 0.1A 0A
    Range (%)
    ±3% ±3% ±3% ±5% ±10%
    Line Reg.(%)
    ±1% ±1% ±1% ±1% ±1%
    Ripple(mVp-p)
    50mV 50mV 120mV 50mV 120mV
    Color
    Black (scratch resistant and lead-free paint)
    Combined +3.3V & +5V
    150W
    Combined +12V
    744W / 62A
    Input Voltage
    90V~264V
    Input Frequency Range
    47Hz ~ 63Hz
    PFC
    Active PFC.(PF>0.95 at Full Load)
    Efficiency
    88%~91% at 20%~100% loading
    MTBF
    100,000 hours at 25°C(at Full Load)
    Operating temperature
    0°C ~ 40°C
    Protection
    Over current protection
    Over power protection
    Over voltage protection
    Over temperature protection
    Under voltage protection
    Short circuit protection
    No Load Protection
    Connectors
    1 x 24 / 20-Pin Motherboard connector (550mm)
    1 x 8 / 4-Pin EPS / ATX 12V connector (750mm)
    1 x 8 / 4-Pin EPS / ATX 12V connector (550mm)
    2 x 8/6-Pin PCIE connector (550mm)
    2 x 6-Pin PCIE connector (550mm)
    8 x SATA connector (600mm / 150mm / 150mm/150mm)
    6 x 4-Pin Peripheral connector (600mm / 150mm / 150mm)
    2 x 4-Pin Floppy connector (600mm / 150mm / 150mm / 150mm)
    Cooling System
    Ultra silent 139mm Air Penetrator fan with fluid dynamic bearing
    Noise Level
    17dBA-28dBA
    Dimension
    150 mm (W) x 86 mm (H) x 180 mm (D)
    5.91" (W) x 3.39" (H) x 7.09" (D)
    Weight
    3.085 kg
    Certification
    80 PLUS Gold
    Other
    GPU Support list
    Compatible with ATX12V v2.4


    ● Specifications presented on this page contains most recent revisions and may differ from those printed on retail boxes or manuals.


    Dimensions and cable pinout diagram