SDP12
  • Provides mounting for two SATA M.2 SSDs and one NVMe M.2 SSD into one 3.5” drive bay
  • Supports multiple drive lengths of 42mm, 60mm, 80mm,110mm
  • Supports PCIe NVMe M.2 SSD width up to 30.5mm
  • Improves system performance by replacing your platter drive with up to three M.2 SSDs
  • Exclusive stud easily to fix on pre-drilled mounting holes facilitate installation and removal of SSD
  • No driver installation required
COLOR

There are three types of M.2 SSDs, please make sure you know the difference between them and whether your system/motherboard support them before pairing these with your SilverStone product.

SATA (B key)
Used for SATA SSDs, and interfaced through the AHCI driver and SATA 3.0 (6 Gbit/s) port exposed through the M.2 connector.

PCI Express using AHCI (M key)
Used for PCI Express SSDs and interfaced through the AHCI driver and provided PCI Express lanes, providing backward compatibility with widespread SATA support in operating systems at the cost of not delivering optimal performance by using AHCI for accessing PCI Express SSDs.

PCI Express using NVMe (M key)
Used for PCI Express SSDs and interfaced through the NVMe driver and provided PCI Express lanes, as a high-performance and scalable host controller interface designed and optimized especially for interfacing with PCI Express SSDs. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and complementing the parallelism of contemporary CPUs, platforms and applications.

Product Specifications
Model No.
SST-SDP12
Color
Silver
Material
1.0mm painted steel
Power connector
SATA 15-Pin x 1
Host interface
7-Pin SATA connector x 2 36-Pin SFF-8643 connector x 1 (U.2)
Form factor
M.2
SATA Cable length
500mm±10mm
Application
3.5" internal drive bay
Capacity
SATA M.2 x 2
PCIe NVMe M.2 x 1
Number of SATA cable
2 pcs
Module Key
SATA-based B key* x 2
PCIe x4 NVMe-based M key x 1
LED indicator
HDD Access: Blue blinking**
Dimension
101.6 mm (W) x 25.4 mm (H) x 146 mm (D)
Net weight
235.4g±10g
* B key SSD requires SATA 7 pin cable connected to motherboard to function
** Due to the different type M.2 SSD designs, if you don’t see LED indicator blinking, it means the SSD used does not support such feature.
*** MiniSAS HD SFF-8643 cable not included. If your motherboard supports SFF-8643 U.2 connector, we recommend using SilverStone’sSST-CPS04.
File Download
SDP12 Manual
Version
V1.0
File Size
626.90 KB
SDP12 High resolution photos
File Size
11.78 MB
SDP12 Product Sheet (sdp12-edm-en.jpg)
File Size
370.96 KB