CS01-HS
  • Modern design with premium aluminum exterior
  • Built-in six hot-swappable 2.5" drive bays with SAS 12 Gbit/s / SATA 6 Gbit/s backplane*
  • Vertical layout for stack effect cooling with built-in Air Penetrator fan
  • Accommodates two more 2.5" drives internally for total eight drive capacity
  • Supports 7.5" (190mm) low profile expansion card
COLOR
Product Specifications
Model No.
SST-CS01S-HS (Silver)
SST-CS01B-HS (Black)
Material
Aluminum outer shell, steel body
Motherboard
Mini-ITX
Drive bay
External
  • 2.5" SAS/ SATA hot-swap x 6 (support up to 15mm) with SAS 12 Gbit/s** / SATA 6 Gbit/s HDD backplane
Internal
  • 2.5" x 2 (Support up to 12.5mm)
3.5" Internal
  • --
2.5" Internal
  • --
Cooling system
Front
  • --
Rear
  • --
Side
  • --
Top
  • --
Bottom
  • 120mm AP fan x 1 , 1200rpm, 19.7dBA
Internal
  • --
Expansion slot
1x low profile
Front I/O port
USB 3.0 x 2
Power supply
SFX / SFX-L
Net weight
4.289kg
Dimension
210.5mm (W) x 322 mm (H) x 210 mm (D), 14.2 liters
8.27" (W) x 12.68" (H) x 8.27" (D), 14.2 liters
Expansion card
1 x low profile up to 7.5” (190mm), width restriction – 2.95” (74mm)
Limitation of CPU cooler
68mm
Limitation of PSU
130mm (Up to SFX-L)
* To use SAS drive, you must have motherboard or expansion card with hardware SAS controller.
** Mini-SAS HD (SFF8643) to SATA 7 pin cable and 12 Gbit/s SAS HD card required for 12 Gbit/s performance (i.e. SilverStone CPS05 & ECS05)
File Download
CS01-HS Manual
Version
v1.0
File Size
2.26 MB
CS01-HS High resolution photos
File Size
28.23 MB
CS01-HS Product Sheet (cs01-hs_edm_en.jpg)
File Size
925.93 KB
Q & A
The connection between the backplane and the motherboard or the host control card is only a SATA data transmission cable. This cable does not contain the control signal of the LED. Therefore, in the definition of SATA HDD, SATA Power Pin11 is reserved for the staggered spinup/activity indication of the HDD. The HDD backplane of any NAS or server chassis is based on this specification as the indicator light of the HDD.
If your HDD tray cannot display this LED light, we recommend to check with HDD manufacturer if your HDD has a reserved LED signal that can be driven by SATA power pin11.