• Eight port RGB light strip connectors
  • Includes two RGB LED light strips
  • Built-in IC preset for directly changing colors
  • Built-in magnetic strip and adhesive tape provide flexible install option

Single color mode:OFF > white > red > blue > green > light green > light blue > purple > single color breathing
Single color breathing mode:white > red > blue > green > light green > light blue > purple > gradient mode
Gradient mode:breathing gradient > color gradient > OFF
Sequence:OFF > single color mode > single color breathing mode > gradient mode > OFF
Press for 3 sec to turn off light at any time, lightly press again to resume operation mode prior to turn off.
Please refer to manual and carefully follow its installation steps to avoid incorrect connections and causing accidental damages.

Product Specifications
Model No.
Plastic outer shell
46mm (W) x 19mm (H) x 85mm (D)
SST-LS02 RGB LED strip x 2

Extend Y cable x 2****

RGB 4pin signal cable x 1

4pin peripheral cable x 1
Signal input
*Via RGB 4pin host (+12V, G, R, B**)
or built-in IC control
Signal output
SilverStone custom RGB 4pin x 8***
Output limitation (each port)
SST-LS02 (12V, 0.12A) x 5
or other identically spec’d RGB light strips
* Be sure to turn off power before switching signal input switch or install / remove LED strip
** Please check the signal source’s pin header that you want to connect is the same as LSB01’s pin definition.
*** Control box’s connectors are proprietary SilverStone custom connectors and are not compatible with other RGB strip’s 4pin connectors.
**** One to two Y cable can support SilverStone custom connectors and others RGB 4pin connectors.
File Download
LSB01 manual
File Size
433.71 KB
LSB01 High resolution photos
File Size
5.08 MB
LSB01 Product Sheet (lsb01-en.pdf)
File Size
304.45 KB