ECM22
- Exposed gold inlays efficienty cool installed M.2 SSD for consistently high performance
- Supports M.2 SSD up to 110mm in length
- Converts one M.2 port (M key) into one PCIe x4 interface
- Converts a second M.2 port (B key) into SATA interface
- Supports two M.2 SSD simultaneously
- Includes optional Low-profile expansion slot
- No driver installation required
 Before (no thermal pad): 83 deg. Celsius (181.4 deg. Fahrenheit) |
 After (with thermal pad): 69.1 deg. Celsius (156.38 deg. Fahrenheit) |
Test Environment
|
There are three types of M.2 SSDs, please make sure you know the difference between them and whether your system/motherboard support them before pairing these with your SilverStone product.
SATA (B key)
Used for SATA SSDs, and interfaced through the AHCI driver and SATA 3.0 (6 Gbit/s) port exposed through the M.2 connector.
PCI Express using AHCI (M key)
Used for PCI Express SSDs and interfaced through the AHCI driver and provided PCI Express lanes, providing backward compatibility with widespread SATA support in operating systems at the cost of not delivering optimal performance by using AHCI for accessing PCI Express SSDs.
PCI Express using NVMe (M key)
Used for PCI Express SSDs and interfaced through the NVMe driver and provided PCI Express lanes, as a high-performance and scalable host controller interface designed and optimized especially for interfacing with PCI Express SSDs. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and complementing the parallelism of contemporary CPUs, platforms and applications.
Product Specifications
Model No.
SST-ECM22
Interface
PCI Express x4 / SATA 6 Gbps
SSD Interface
M.2 (NGFF)
Module Key
SATA-based B key
PCIe x4 NVMe-based M key
PCIe x4 NVMe-based M key
Number of Drives
2
LED indicator
Power LED: Red
SATA M.2 SSD Read / Write LED: Orange
PCIe M.2 SSD Read / Write LED: Blue
SATA M.2 SSD Read / Write LED: Orange
PCIe M.2 SSD Read / Write LED: Blue
Dimension
121mm (W) x 11mm (H) x 157.3mm (D)
Net weight
60g
Support Length of M.2 SSD
30mm, 42mm, 60mm, 80mm, 110mm
* ECM22’s 'M' key is for use only with PCIe SSD, 'B' key is for use with only SATA SSD
** B key SSD requires SATA 7 pin cable connected to motherboard to function
*** For B+M Key SATA M.2 SSD, please use B key slot
**** M.2 PCIe NVMe mode SSD requires the use of Intel® 9 series (Z97 H97 Z170 X99) / AMD 300 series (A320 B350 X370) or higher version chipset motherboard with Windows 8 or higher version operating system
***** If you wish to boot off using M.2 SSD, your motherboard needs to support it. Due to BIOS limitations, not all motherboards support booting off M.2 SSD so please consult your motherboard manual or vendor for more details on how to enable this function
****** Before installing M.2 SSD to ECM22, please make sure to remove protective film covering the gold inlays to ensure optimal heat transfer performance
Product Reviews
