ECM21-E
Screwless design M.2 PCIe/NVMe SSD to PCIe x4 adapter card
  • Screwless design for M.2 PCIe/NVMe SSD
  • Supports PCIe Gen4 M.2 PCIe/NVMe SSD
  • CLKREQ jump pin header
  • LED indicator for displaying M.2 PCIe/NVMe status
  • Supports 2230, 2242, 2260, and 2280 length M.2 SSD
  • Converts M.2 port (M key) into one PCIe x4 interface
VERSION
Supports PCIe Gen 4 M.2 PCIe/NVMe SSD Supports PCIe Gen 4 M.2 PCIe/NVMe SSD
Supports PCIe Gen 4 M.2 PCIe/NVMe SSD
Utilize or add speedy M.2 PCIe/NVMe SSDs onto your existing PC or motherboard
Screwless design for M.2 SSD Screwless design for M.2 SSD
Screwless design for M.2 SSD
Ease the process of installation by simply pressing M.2 SSD down into latch to secure mounting.
CLKREQ function CLKREQ function
CLKREQ function
CLKREQ jump setting for low power management
Converts M.2 port (M key) into one PCIe x4 interface Converts M.2 port (M key) into one PCIe x4 interface
Converts M.2 port (M key) into one PCIe x4 interface
Supports 2230, 2242, 2260, and 2280 length M.2 SSD Supports 2230, 2242, 2260, and 2280 length M.2 SSD
Supports 2230, 2242, 2260, and 2280 length M.2 SSD
There are three types of M.2 SSDs, please make sure you know the difference between them and whether your system/motherboard support them before pairing these with your SilverStone product.

Legacy SATA (B key)
Used for SATA SSDs, and interfaced through the AHCI driver and legacy SATA 3.0 (6 Gbit/s) port exposed through the M.2 connector.

PCI Express using AHCI (M key) only support to install this type
Used for PCI Express SSDs and interfaced through the AHCI driver and provided PCI Express lanes, providing backward compatibility with widespread SATA support in operating systems at the cost of not delivering optimal performance by using AHCI for accessing PCI Express SSDs.

PCI Express using NVMe (M key) only support to install this type
Used for PCI Express SSDs and interfaced through the NVMe driver and provided PCI Express lanes, as a high-performance and scalable host controller interface designed and optimized especially for interfacing with PCI Express SSDs. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and complementing the parallelism of contemporary CPUs, platforms and applications.


The following SSD models have been tested and verified by SilverStone to work optimally with the product presented on this page.

 
Product Specifications
Model No.
SST-ECM21-E
Interface
PCI Express x4
SSD Interface
M.2 (NGFF)
Support Length of M.2 SSD
30mm, 42mm, 60mm, 80mm
Module Key
PCI-E x4-based M key
LED indicator
Power ON: Green

Read / Write: Red
Dimension
120mm (W) x 23mm (H) x 104mm (D)
Net weight
57g
Note : If you wish to boot off using M.2 SSD, your motherboard needs to support it. Due to BIOS limitations, not all motherboards support booting off M.2 SSD so please consult your motherboard manual or vendor for more details on how to enable this function.
Note : M.2 PCIe-NVMe mode SSD requires the use of Intel® 9 series (Z97 H97 Z170 X99) / AMD 300 series (A320 B350 X370) or higher version chipset motherboard with Windows 8 or higher version operating system.
File Download
描述 Version File Size 下載
描述
Version
V1.0
File Size
770.92 KB
下載
描述
Version
File Size
9.65 MB
下載
描述
Version
File Size
1.05 MB
下載
Back to list page