tj09
  • Premium all-aluminum chassis for extended ATX, ATX, SSI motherboards
  • 120mm fan only design for ultimate performance & quietness
  • Unprecedented air duct dedicated for graphics card cooling
  • Advanced structural engineering with superior chassis stiffness
  • User friendly layout with multiple tool-less access
  • Classic SilverStone styling and finish
VERSION
Product Specifications
Model No.
SST-TJ09B (black)
SST-TJ09S (silver)
SST-TJ09B-W (black, with window)
SST-TJ09S-W (silver, with window)
Material
5.0mm aluminum front panel, 2.0mm aluminum body
Color
Black
Drive bay
3.5" x 1
External
  • 5.25" x 43.5" x 1
Internal
  • 3.5" x 1, 3.5" x 6 (vibration dampening)
Cooling system
Front
  • 1 x 120mm fan slot between HDD cages
Rear
  • 1 x 120mm exhaust fan, 1200rpm, 21dBA
Top
  • 2 x 120mm fan slots
Side
  • 1 x 120mm mid-section fan, 1200rpm, 21dBA
Limitation of CPU cooler
169mm
Expansion slot
7
Limitation of expansion card
, width restriction-6.81”
Limitation of VGA card
13.2"
Power supply
1 x Optional standard PS2 (ATX) or 1 x Redundant PS2
Limitation of PSU
Unlimited
Front I/O port
USB 2.0 x 2

IEEE1394 x 1

Audio x 1

MIC x 1
Dimension
210 mm (W) x 525 mm (H) x 605 mm (D), 66.7 liters
8.27" (W) x 20.67" (H) x 23.82" (D), 66.7 liters
Net weight
11.2kg
  To build your water cooling system, we recommend equip your TJ09 with RADSUPPORT09 to install a 120x2 radiator in TJ09.
 
File Download
描述 Version File Size 下載
描述
Version
v1.0
File Size
442.81 KB
下載
描述
Version
v1.0
File Size
66.98 KB
下載
描述
Version
File Size
101.48 KB
下載
Q & A

1. After loosening three screws, detach left side panel gently.
     

2. Use allen wrench to loosen four screws and detach front I/O unit from case gently.
     

  For earlier versions of TJ09, please loosen four screws from inside the case to detach the front I/O unit.
     

3. Loosen two screws located on the back of front I/O unit.
     

4. Loosen two screws on both side of front I/O unit.
     

5. Loosen four screws near front I/O module and detach it gently.
     

6. Install USB 3.0 front I/O module (part number: G11303500) and secure with screws.
     

7. Install new aluminum front I/O cover (part number: SILVER: G10106112 / Black : G10106122 ) and secure with screws. Assemble other parts back in reverse order carefully.
     Your case is now USB3 ready.