Right:1 x 120mm intake fan, 1200rpm, 21dBA Right:1 x 120mm fan slot (optional)
Top
1 x 120mm intake fan, 1200rpm, 21dBA 1 x 120mm / 140mm fan slot (optional)
Bottom
1 x 120mm fan slot (optional)
Internal
--
Expansion slot
8
Front I/O port
USB 3.0 x 2 (backward compatible with USB 2.0)
audio x 1
MIC x 1
Power supply
Standard PS2 (ATX) *1
Net weight
9.6kg
Dimension
214mm(W)x489mm(H)x489mm(D), 51.2 liters 8.43" (W) x 19.25" (H) x 19.25" (D), 51.2 liters
Extra
Support Kensington locks
Expansion card
*Compatible up to 17" (431mm) long, width restriction-6.14" (155mm)
Limitation of CPU cooler
168mm
Limitation of PSU
Unlimited *1
Radiator support
Front
N/A
Top
120mm x 1 / 240mm x 1
Rear
120mm x 1
Side
--
Bottom
N/A
*1 – If bottom fan or 2.5” SSD is installed, the maximum depth for PSU is 180mm (or 160mm with extra cabling room), otherwise there are no depth limitations.
*2 – If hard drive is installed in front of the cards, the length limitation is 12.8 inches (325mm).
This is absolutely to be avoided. The custom SATA cable connectors are designed to facilitate cabling and reduce clutter with multiple
SATA devices. Each cable from power supply has limited capacity to handle the combined current draw from multiple hard drives so we
highly recommend connect one custom SATA cable with a single power cable from the power supply
If you install multiple high-speed hard drives in the TJ04-E, attaching heat sink onto hard drives
can help cool them more effectively. The heat sinks are not made for fanless cooling, they still
need fans for maximum cooling efficiency. Please make sure all screws are tightly secured to
ensure the best possible conduction cooling. There is no need to apply thermal grease between
hard drives and heat sinks as it does not improve cooling performance from testing we have
conducted.
You may install the radiator where the top fan is located. Since installing the radiator there will interfere with a large CPU air cooler,
the radiator must be used for CPU cooling.
The extra space there is designed for cable storage. If you are using a non-modular power supply, you can store
extra cables there. Even if you use modular power supply, you can still store unused cables in the extra space to
avoid misplacing them.
The hard drive fan and hard drive noises can leak out through the right intake vents so we recommend placing
your PC to your right side to turn away the noise source.
The TJ04-E has a unique 5cm spacing designed between the drive cage and the intake fan, which enables cool
air to flow directly onto installed hard drive’s aluminum surface. This design has been validated by SilverStone’s
R&D team through repeated thermal testing to be fully capable in coping with fully installed cage. The extra 5cm
spacing also allows TJ04-E’s graphics card cooling to be unaffected by the number of hard drives installed.