1 x 120mm/140mm fan slot compatible with radiator(option)
Rear
--
Side
Oversized vents
Top
Oversized vents
Bottom
--
Internal
--
Expansion slot
2
Front I/O port
Type-C version: USB Type-C x 1, USB 3.0 x 1, Audio x 1, MIC x 1
USB 3.0 version: USB 3.0 x 2, Audio x 1, MIC x 1
Power supply
Optional standard PS2(ATX)
Net weight
SG13B:2.47Kg / SG13B-Q:2.43Kg
Dimension
222mm (W) x 181mm (H) x 285mm (D), 11.5 liters 8.74" (W) x 7.13" (H) x 11.22" (D), 11.5 liters
Expansion card
Compatible up to 10.6" (270mm) long, width restriction-5.11" (129mm)
Limitation of CPU cooler
61mm
Limitation of PSU
150mm*
Radiator support
Front
120mm / 140mm x 1
Top
N/A
Rear
N/A
Side
--
Bottom
N/A
Rail Sliding
* Installing larger 140mm based radiator or fan will require the removal of the upper drive cage and sacrifice available room for graphics card to 9.3" (236mm) minus the thickness of the radiator.
* Maximum length for PSU is 150mm, we recommend 140mm due to varying connector locations on PSUs and the unique structure of SG13.
Many Mini-ITX motherboards are currently designed based off of Intel’s reference layout, which means the CPU is likely positioned too close to
the PCI Express slot and limits the size of CPU coolers that can be installed. Normally if the same size fan is used, a high-end air cooler is more
efficient than liquid cooler. However, Mini-ITX motherboard restrictions usually limit air coolers that use 92mm fan or smaller so liquid coolers would
have the advantage in the SG13 as the radiator is installed in the bottom of the case and not limited by the space around CPU area. We can fully
recommend using liquid cooler in the SG13 as an alternative, our internal testing also shows liquid coolers to perform better than air coolers within
the SG13.