• Revolutionary 90 degree motherboard mounting from RAVEN RV01
  • Three 180mm Air Penetrator fans for unprecedented positive pressure and stack effect cooling
  • Supports liquid cooling radiator mounting
  • Motherboard back plate opening behind CPU area for quick cooler assembly
  • Supports 11” wide ATX motherboard
  • Highly flexible drive storage options with hot-swappable SATA adapter
Product Specifications
Model No.
SST-RV02B-E (black)
SST-RV02B-EW (black + window)
SST-RV02B-EW-USB3.0 (black + window)
reinforced plastic outer shell, 0.8mm Steel body.
Matte black
Drive bay
  • 5.25" x 5
  • 3.5"/2.5" x 5, 2.5" x 1
Cooling system
  • --
  • --
  • --
  • 1 x 120mm exhaust fan, 950rpm, 18dBA
  • 3 x 180mm intake fan 700/1200rpm, 18/34dBA
  • --
Expansion slot
Front I/O port
USB 2.0 x 2 (SST-RV02B-E, SST-RV02B-EW only)

USB 3.0 x 2 (SST-RV02B-EW-USB3.0 only)

audio x 1

MIC x 1
Power supply
1 x optional standard PS2 (ATX)
Net weight
12.6kg (RV02B-E)
12.4kg (RV02B-E-W)
212mm (W) x 503mm (H) x 643mm (D), 68.6 liters
8.35" (W) x 19.8" (H) x 25.31" (D), 68.6 liters
One CP05 included for single hot-swappable SATA hard drive, additional CP05 can be purchased separately
expansion card
Compatible up to 12.2" (309mm) long, width restriction-6.85" (173mm)
Limitation of CPU cooler
Limitation of VGA card
Limitation of PSU
Radiator support
  • --
  • 120mm x 1
  • --
  • --
  • 120mm x 3
File Download
RV02-E Manual
File Size
12.00 MB
RV02-E High resolution photos
File Size
12.41 MB
RV02-E Product Sheet (EN-RV02-E-USB3.0.pdf)
File Size
727.66 KB
Product Reviews
Q & A

1. Use both hands to remove top cover gently.

2. After loosening four screws, detach both side panels gently.

3. After loosening six screws behind the front panel, detach front panel gently.

4. First, loosen two screws located on the top-front cover.
    Then push top-front cover in the direction as shown gently and finally pull up to detach the top-front cover.

5. Flip top-front cover over to loosen two screws near front I/O module and detach it gently.

6. Install USB 3.0 front I/O module (part number: G11303260) and fasten two screws back gently.

7. Assemble parts back in reverse order carefully.
    Your case is now USB3 ready.

There are two main types of heat pipes used in popular aftermarket coolers, they are groove and powder. Groove heat pipes are very susceptible to gravity while powder heat pipes are less so. To achieve best performance in either heat pipe technology, they need to be placed horizontally or have the heat source side located below the other end of the heat pipe. We recommend choosing and installing components with heat pipes carefully by taking into consideration of the following examples:


The orientation of an enthusiast motherboard in a normal ATX case

The orientation of an enthusiast motherboard in the ##

As the illustrations above show, most enthusiast motherboards with heat pipes will work fine in the ##, the heat source is located below other parts of the heat pipe.
CPU cooler:
Horizontal style cooler

Good orientation Good orientation Bad orientation

Many CPU coolers can be rotated when installing on motherboards, the illustration here shows a SilverStone NT06-E

VGA cooler

The illustration here shows a VGA cooler that will not work well in the ## because the heat source side (touching the GPU) ends up being located higher than the other end.

Back to list page