• Revolutionary 90 degree motherboard mounting from RAVEN RV01
  • Innovative 4.5mm aluminum unibody frame from Temjin TJ07
  • Three 180mm fans for unprecedented positive pressure and stack effect cooling
  • Supports liquid cooling radiator mounting
  • Motherboard back plate opening behind CPU area for quick cooler assembly
  • Supports 11” wide ATX motherboard
  • Foam padded interior for advanced noise absorption

ATI Radeon HD 5970 in FT02

Product Specifications
Model No.
SST-FT02B (black), SST-FT02B-USB3.0 (black)
SST-FT02S (silver), SST-FT02S-USB3.0 (silver)
SST-FT02B-W (black + window), SST-FT02B-W-USB3.0 (black + window)
SST-FT02S-W (silver + window), SST-FT02S-W-USB3.0 (silver + window)
4.5mm aluminum unibody frame, 0.8mm steel body
Drive bay
  • 5.25" x 5
  • 3.5"/2.5" x 5 , 2.5” x1
3.5" Internal
  • --
2.5" Internal
  • --
Cooling system
  • --
  • --
  • --
  • 1 x 120mm exhaust, 1200rpm, 19dBA
  • 3 x 180mm intake fan 700/1200rpm, 18/34dBA
  • --
Expansion slot
Front I/O port
USB 2.0 x 2 (SST-FT02B, SST-FT02S, SST-FT02B-W, SST-FT02S-W only)

USB 3.0 x 2 (SST-FT02B-USB3.0, SST-FT02S-USB3.0, SST-FT02B-W-USB3.0, SST-FT02S-W-USB3.0 only)

Audio x 1

MIC x 1
Power supply
1 x Optional standard PS2 (ATX)
Net weight
15.3kg (FT02B,FT02S)
15kg (FT02B-W, FT02S-W)
212mm (W) x 497mm (H) x 616mm (D), 64.9 liters
8.35" (W) x 19.57" (H) x 24.25" (D), 64.9 liters
One CP05 included for single hot-swappable SATA hard drive, additional CP05 can be purchased separately
Expansion card
Compatible with 12" (304mm) or 12.2" (309mm) (with fan grille removed), width restriction-6.69" (169mm)
Limitation of CPU cooler
Limitation of VGA card
Limitation of PSU
Radiator support
  • N/A
  • 120mm x 1
  • N/A
  • --
  • 120mm x 3
File Download
FT02 Manual
File Size
6.98 MB
FT02 High resolution photos
File Size
63.13 MB
FT02 Product Sheet (EN-FT02-W-EDM-USB3.0.pdf)
File Size
687.00 KB
Q & A

1. Use both hands to remove top cover gently.

2. First, loosen two screws located on the top-front cover.
    Then push top-front cover in the direction as shown gently and finally pull up to detach the top-front cover.

3. Flip top-front cover over to loosen two screws near front I/O module and detach it gently.

4. Install USB 3.0 front I/O module (part number: G11303260) and fasten two screws back gently.

5. Assemble parts back in reverse order carefully.
    Your case is now USB3 ready.

RV02B-W v1.7 and after
FT02B v1.4 and after
FT02S v1.4 and after
FT02B-W v1.7 and after
There are two main types of heat pipes used in popular aftermarket coolers, they are groove and powder. Groove heat pipes are very susceptible to gravity while powder heat pipes are less so. To achieve best performance in either heat pipe technology, they need to be placed horizontally or have the heat source side located below the other end of the heat pipe. We recommend choosing and installing components with heat pipes carefully by taking into consideration of the following examples:


The orientation of an enthusiast motherboard in a normal ATX case

The orientation of an enthusiast motherboard in the ##

As the illustrations above show, most enthusiast motherboards with heat pipes will work fine in the ##, the heat source is located below other parts of the heat pipe.
CPU cooler:
Horizontal style cooler

Good orientation Good orientation Bad orientation

Many CPU coolers can be rotated when installing on motherboards, the illustration here shows a SilverStone NT06-E

VGA cooler

The illustration here shows a VGA cooler that will not work well in the ## because the heat source side (touching the GPU) ends up being located higher than the other end.

Back to list page