HQ / EU / AU / SG
Home Products Chassis Temjin Series TJ09
   
 
EXTERIOR PICTURES
 
 
 
 
INTRODUCTION
The Temjin TJ09 is the first SilverStone chassis designed with graphics card cooling as one of the priorities. To meet this challenge, a brand new mid-section air duct was created to bypass the hard drive cage, allowing the strategically placed 120mm to draw cool air from outside of the chassis and blow it directly onto the expansion slot area. CPU and hard drives are also cooled exclusively by 120mm fans to maximize airflow while reducing noise. Covered in styling reminiscent of beautiful chassis of years past, the TJ09's advanced structure is second in stiffness only to the unibody designed TJ07. If you have been waiting for a chassis with plenty of technical and aesthetic excellence worthy of an upgrade, then the TJ09 is the one.

 
 
SPECIAL FEATURES
  • Premium all-aluminum chassis for extended ATX, ATX, SSI motherboards
  • 120mm fan only design for ultimate performance & quietness
  • Unprecedented air duct dedicated for graphics card cooling
  • Advanced structural engineering with superior chassis stiffness
  • User friendly layout with multiple tool-less access
  • Classic SilverStone styling and finish


FEATURE PHOTOS
 
 
Quiet 120mm fan included for rear exhaust
Dual top panel 120mm fan mounts
All aluminum construction with classic front panel design
 
Slide-out motherboard tray for Extended-ATX/SSI-EEB motherboards
 
Dual hard drive compartment with 120mm fan slot in between
 
PSU slot for ATX/PS2 or redundant PSUs with security holder
Unique SilverStone designed see-through air intake vent with 120mm fan
Home theater component style foot stands
TJ09 Feature list
Model No.
SST-TJ09B (black)
SST-TJ09S (silver)
SST-TJ09B-W (black, with window)
SST-TJ09S-W (silver, with window)
Material
5.0mm aluminum front panel, 2.0mm aluminum body
Motherboard
SSI-EEB, Extended ATX, ATX, Micro-ATX
Multimedia
--
Drive Bay
External 5.25" x 4
3.5" x 1
Internal 3.5" x 6 (vibration dampening)
Cooling System
Front 1 x 120mm fan slot between HDD cages
Rear 1 x 120mm exhaust fan, 1200rpm, 21dBA
Side 1 x 120mm mid-section fan, 1200rpm, 21dBA
Top 2 x 120mm fan slots
Bottom --
Internal --
Expansion Slot
7
Front I/O Port
USB 2.0 x 2
IEEE1394 x 1
Audio x 1
MIC x 1
Power Supply
1 x Optional standard PS2(ATX) or 1 x Redundant PS2
Operating system support
--
Expansion Card
width restriction-6.81"
Limitation of CPU cooler
169mm
Limitation of PSU
Unlimited
Net Weight
11.2kg
Dimension
210 mm (W) x 525 mm (H) x 605 mm (D), 66.7 liters
Extra
--
Support VESA Mount
--

Remark
  To build your water cooling system, we recommend equip your TJ09 with RADSUPPORT09 to install a 120x2 radiator in TJ09.
 

There are no recommend items for this product.
Describe
Ver
Size
Download
Installation Guide
v1.0
443 KB
     
Pin definition
v1.0
67 KB
     


TJ09 eDM (EN-TJ09.jpg)
 
101 KB

  • Q. I want to replace the mid section 120mm fan, how do I remove it from the bracket?
    A: Please click here for instruction
  • Q. Front panel connectors installation guide.
    A:

    Power switch and reset switch installation guide:
    Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



    LED connector installation guide:
    Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
    White colored wires are negative while other colored wires are positive.
    Power LED connector is designed as separate pins for compatibility with different motherboard specifications.
  • Q. USB 3.0 Cable Upgrade Guide
    A:

    1. After loosening three screws, detach left side panel gently.
         

    2. Use allen wrench to loosen four screws and detach front I/O unit from case gently.
         

      For earlier versions of TJ09, please loosen four screws from inside the case to detach the front I/O unit.
         

    3. Loosen two screws located on the back of front I/O unit.
         

    4. Loosen two screws on both side of front I/O unit.
         

    5. Loosen four screws near front I/O module and detach it gently.
         

    6. Install USB 3.0 front I/O module (part number: G11303500) and secure with screws.
         

    7. Install new aluminum front I/O cover (part number: SILVER: G10106112 / Black : G10106122 ) and secure with screws. Assemble other parts back in reverse order carefully.
         Your case is now USB3 ready.
         


If the answers don't solve your problem, please email to support@silverstonetek.com. Thanks!
 
 
ALL trademarks are registered to their respective owners. ©2014 SilverStone Technology Co., Ltd. All Rights Reserved.