Sugo Series     SG13

■ Supports standard-length expansion cards (10.5 inches)

■ Mini-DTX / Mini-ITX motherboard & ATX PSU compatible

■ Supports 120mm or 140mm single fan All-in-One Liquid Cooler

■ Supports 2.5” and 3.5” hard drives

■ Elevated standoff for motherboard back side components

         After bringing Mini-ITX into mainstream DIY (do it yourself) market in 2009 with the Sugo SG05, SilverStone is looking to define the category again with SG13, a newly evolved design that aims to satisfy every type of computer users. At only 11.5 liters in size, it has suitably small statue for easily integrating into numerous computing environments and will comfortably fit many standard components for general purpose or office builds. For enthusiasts and in keeping with Sugo series’ famed tradition, the SG13’s ability to fit 10.5” long expansion card, standard ATX power supply, and all-in-one liquid cooler in 120mm or 140mm size will help produce amazingly small and powerful systems.

Model No. SST-SG13B (black, mesh front panel)
SST-SG13B-Q (black, plastic front panel with faux aluminum finish)
SST-SG13WB (black&white, mesh front panel)
SST-SG13WB-Q (black&white, plastic front panel with faux aluminum finish)
SST-SG13P (pink, mesh front panel)
Material Mesh or plastic front panel, steel body
Motherboard Mini-DTX, Mini-ITX
Drive bay External --
Internal 3.5” x 1 or 2.5”x2 , 2.5”x1
Cooling system Front 1 x 120mm/140mm fan slot compatible with radiator(option)
Rear --
Side Oversized vents
Top Oversized vents
Bottom --
Internal --
Radiator support Front N/A
Rear 120mm x 1
Top N/A
Bottom N/A
Expansion slot 2
Front I/O port USB 3.0 x 2
audio x 1
MIC x 1
Power supply Optional standard PS2(ATX)
Expansion card Compatible up to 10.5” long, width restriction-5.11"
Limitation of CPU cooler 61mm
Limitation of PSU 150mm*
Net weight SG13B:2.47Kg / SG13B-Q:2.43Kg
Dimension 222mm (W) x 181 mm (H) x 285 mm (D) 11.5 liters

* Installing larger 140mm based radiator or fan will require the removal of the upper drive cage and sacrifice available room for graphics card to 9.3” minus the thickness of the radiator.
* Maximum length for PSU is 150mm, we recommend 140mm due to varying connector locations on PSUs and the unique structure of SG13.

SATA II cable are perfect for any regular SATA devices. more...
Get a SST-CLEARCMOS add-on to conveniently clear CMOS without opening the case. more...
Short cable set reduces cable clutter in smaller cases & systems. more...
Durable high performance all-in-one Liquid Cooler more...
140mm ultra-quiet PWM fan more...
Advanced low-profile heatsink with Heat-pipe direct contact (HDC) technology more...
Power supplies with excellent combination of features, efficiency, and durability. more...
SG13 manual
2,814 KB
SG13 High resolution photos
23,676 KB

SG13 eDM (sg13_edm_en.pdf)
478 KB

A:This model utilizes the type of spray paint designed for better resistance to fingerprints and scratches, which is characterized by the tiny bumps.

A:Many Mini-ITX motherboards are currently designed based off of Intel’s reference layout, which means the CPU is likely positioned too close to the PCI Express slot and limits the size of CPU coolers that can be installed. Normally if the same size fan is used, a high-end air cooler is more efficient than liquid cooler. However, Mini-ITX motherboard restrictions usually limit air coolers that use 92mm fan or smaller so liquid coolers would have the advantage in the SG13 as the radiator is installed in the bottom of the case and not limited by the space around CPU area. We can fully recommend using liquid cooler in the SG13 as an alternative, our internal testing also shows liquid coolers to perform better than air coolers within the SG13.

A:Yes it does, with room to spare!