Sugo Series     SG10



■ Supports graphics cards of any length

■ Supports full tower CPU coolers

■ Supports Strider Plus PSUs up to 1000W

■ Mandatory cable routing design

■ Ample fan slots for maximum airflow

■ Cleanly styled aluminum front panel

         To further increase the appeal of the groundbreaking Sugo SG09, SilverStone engineers crafted a follow-up version in the SG10. The front panel now utilizes a 7mm thick aluminum with a fine filter hidden beneath this has tremendously increased its simple and elegant appearance. Designed as the ultimate SFF with only 23liters, the SG10 retained all of SG09’s features and still able to accommodate standard size components such as ATX power supply, Micro-ATX motherboard, full tower CPU cooler and dual 13.3” high-end graphic cards. For those looking to challenge their own PC building skills in return for a superbly packaged machine that has uncompromised performance and is portable, the Sugo SG10 is the one to get.
 


Model No. SST-SG10B (black)
--
--
--
Material Aluminum front panel, steel body
Motherboard Micro-ATX, Mini-DTX, Mini-ITX
Multimedia --
Drive Bay External 12.7mm/9.5mm slim optical drive x 1
--
Internal 3.5”x 2 * , 2.5” x 4*
Cooling System Front --
Rear 1 x 120mm 1200rpm 22dBA
Side Left:1 x 120mm 1200rpm 22dBA (backward compatible with 92mm) 2 x 80/92mm fan slot
Right:80mm fan slot
Top 180mm Air Penetrator 600/900/1200rpm, 17/25/34dBA (backward compatible with 140mm)
Bottom --
Internal --
Expansion Slot 4
Front I/O Port USB 3.0 x 2
audio x 1
MIC x 1
Power Supply Optional standard PS2(ATX) up to 180mm*
Operating system support --
Expansion Card Compatible up to 13.3” long, width restriction-5.70"
Limitation of CPU cooler 165mm
Limitation of PSU 180mm
Net Weight 5.8kg
Dimension 220mm (W) x 295mm (H) x 354mm (D), 23 liters
Extra support two Kensington locks
Support VESA Mount --

Remark
* If you intend to utilize all hard drive slots, please remove all unused power supply cables.
   These unused cables may cause problem with the installation. SSDs are highly recommended in place of hard drives.

* Maximum length for PSU is 180mm, we recommend 160mm due to varying connector locations on PSUs and the unique structure of SG10.
   We do not promise that all retail PSUs on the market can be installed in the SG10. Please refer the guides provided in this manual to select your PSU.


SUGO-PACK
Get a Sugo Pack to conveniently take your SG10 anywhere you go. more information...
CLEARCMOS
Get a SST-CLEARCMOS add-on to conveniently clear CMOS without opening the case. more information...
PP05-E
Short cable set reduces cable clutter in smaller cases & systems. more information...
AP182
Equip your SG09 with AP182 for crazy airflow. more information...
FQ81
80mm ultra-quiet PWM fan more information...
HE01
Twin tower cooler for maximum cooling performance. more information...
SOB02
SOB02 is a slot-loading slim Blu-ray writer with included SATA adapter and cable. more information...
SOD02
SOD02 is a slot-loading slim DVD burner with included SATA adapter and cable. more information...
 
 
Describe
Ver
Size
Download
SG10 manual
v2.0
5,635 KB
     


SG10 eDM (EN-SG010-EDM.pdf)
 
890 KB

3.5” hard drives are cooled by the top 180mm fan.
We recommend using SSD for 2.5” drives as they are more heat tolerant.

The total volume of all possible installed fans adds up to 2.4 liters, which is more than the volume of two 5.25” drives. Since optical drives have the lowest effect on performance, we reasoned that the use of slim optical drive is the best way to reduce the size of SG10.

The top 180mm fan will help to expel power supply’s exhausted air out of the case. According to our testing, the PSU heat will not affect case performance.

Since there are no standards for power supply’s power cord connector location, we provide extra length to ensure compatibility. The SG10 is also designed to accommodate power supply up to 1200W so we used a thicker 15A cable.

By installing the PSU horizontally, it will take up less depth compared to installing it longitudinally. With traditional PSU installation, the power cord will occupy space behind the case therefore the area taken by the power cord is not part of the case measurement.

If your PSU has an AC switch, make sure the switch is at the “ON” position.

SG10 has four fan slots dedicated for graphic cards and provide top-notch cooling ability. If you have installed all extra fans according to our instruction manual and the graphic card still overheats, please contact the graphics card manufacturer for assistance.

The SG10 has 6 fan slots and if you include the fan on the CPU cooler, there are up to 7 fan connectors in total. Currently, there are no motherboards that support this amount of fans, therefore we have included a 1 to 3 fan adapter cable to support more fan connections. Although you can not monitor the fans through your motherboard when connected to the adapter, this is the best way to connect all the fans. Below is a list of Micro-ATX motherboards that has the most fan connectors: 6 Fan connectors: DFI Lanparty JR Series, ASRock X79 Extreme4-M 5 Fan connectors: ASUS ROG Gene Series

Yes it does, with room to spare!

From the tests we’ve conducted during development, a quality tower-style cooler can be used without CPU fan and instead rely only on chassis fans to cool CPU up to 130W TDP (Core i7, not overclocked). However, performance may vary depending on the quality of your CPU cooler and other factors, so you will still need to test the limit on your own.