SilverStone’s continued push to popularize USB 3.0 has resulted in the development of FP37, one of the first card readers to take advantage of USB 3.0 standard’s increased speed. The new SDXC format is supported for greater capacity and faster transfer speed as well as nearly all other memory card formats. To make integration of FP37 more seamless, both black and silver colored front bezels are included.
Supports standard 19pin USB 3.0 internal connector
SD / SDHC / SDXC / Mini SD / Micro SD(T-Flash)(No Card Adapter Required) / MS / MS Duo / MS PRO / MS PRO Duo / MS Micro(M2)(No Card Adapter Required) / MS PRO-HG Duo / MMC / RS MMC / MMC Micro / MMC Mobile / xD / CF
Q. Why after connecting the FP37, only USB 3.0 ports can be used but not the card reader?
A: There are two versions of FP37, please check your serial number below and download the appropriate firmware.
Note: if incorrect firmware is used, the FP37 will still function properly but it might affect the LED light’s function.
Download firmware FW0561 and install by executing the unzipped file.Download
Download firmware DP04 and install by executing the unzipped file.Download
Q. Why does FP37 not work after firmware has been updated?
A: Please make sure all cables have been connected firmly and correctly. Also go to “Device Manager” if a yellow question mark appears like the below diagram, it means your motherboard’s driver is not up-to-date, please download the latest driver from your motherboard’s manufacturer website to solve this problem.
Start → Control Panel → Device Manager→ Under View select Device by connection → PCI bus Under PCI bus, there will by multiple PCI standard PCI to PCI bridge devices. Click open the available options until the device appears like the attached diagram