HQ / EU / AU / SG / MY
Home Products Chassis Grandia Series GD05
The Grandia GD05 is a follow-up of the incredible GD04 as a chassis that combines years of SilverStone expertise in SFF (Small form factor) and HTPC (Home Theater Personal Computer) designs. It has the same beautifully proportioned exterior and powerful thermal capability that rivals the best tower chassis. However, the front panel of the GD05 was designed to be more flexible so that its 325mm depth can be utilized in more places than just home theaters. Even though GD05’s diminutive size allows it to easily integrate into any home theater cabinet, it can still accommodate an impressive list of standard components such as 5.25” device, two 3.5” hard drives, a 2.5” SSD, a standard ATX power supply, and two high-end graphics cards up to 11 inches. Cooling duty in the GD05 is handled by three filtered 120mm fans designed with the same positive air pressure to enable class-leading cooling efficiency, reduced dust buildup, and silent operation. To make installation simpler, there is even enough space for cable management to be easily accomplished without the need for short cabled or modular power supply. Coupled with special attention given to the order of installation, any user can quickly assemble or upgrade the GD05 with a small and powerful PC system.

  • Three silent 120mm fans included
  • Positive air pressure design for excellent cooling/quietness and dust-prevention
  • Beautiful aluminum skin for classic appearance
  • Incredible 325mm depth to fit comfortably inside home theater cabinet
  • Designed with cable routing for easy installation
  • Supports power supply up to 180mm long
  • Support expansion cards up to 11 inches
  • Support 2.5” hard drive or SSD (Solid-state drive)


Graphic card length reference:
AMD Radeon HD 5870 11"
NVIDIA GeForce GTX295/280/260/275 - 10.5"
NVIDIA GeForce 9800GTX/9800GTX+ - 10.5"
AMD Radeon HD 4870X2 - 10.5"
AMD Radeon HD 5850 - 9.5"
NVIDIA GeForce 9800GTX/9600GT/GTO - 9"
AMD Radeon HD 4870/4850 - 9"

Model No.
Aluminum skin over plastic front panel, 0.8mm SECC body
Micro-ATX, Mini-DTX, Mini-ITX
Drive Bay
External 5.25" x 1
Internal 3.5" x 2 , 2.5” x 1 or 3.5" x 1 , 2.5” x 2
Cooling System
Front --
Rear 2 x 80mm fan slots (optional mounting)
Side Right: 2 x 120mm intake fans, 1200rpm, 20dBA
Left: 1 x 120mm intake fan, 1200rpm, 20dBA
Also compatible with 80mm fan
Top --
Bottom --
Internal --
Expansion Slot
Front I/O Port
USB 2.0 x 2 (GD05B only)
USB 3.0 x 2 (GD05B-USB3.0 only)
audio x 1
MIC x 1
Power Supply
Support standard PS2(ATX)
Operating system support
Expansion Card
Support graphic cards up to 11 inches., width restriction-4.92"
Limitation of CPU cooler
70mm (remove ODD if you want install up to 120mm)
Limitation of PSU
180mm (remove Left fan replacement as 80mm if you want install up to 220mm)
Net Weight
440 mm (W) x 151 mm (H) x 325 mm (D), 21.6 liters
support Kensington lock (v1.4 or after)
Support VESA Mount

Recommended SilverStone products
Get a SST-CLEARCMOS add-on to conveniently clear CMOS without opening the case. more information...
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
800mm ultra-quiet PWM fan more information...
CPU cooler designed for HTPC. more information...
Fanless 400W PSU more information...
GD05 Manual
5,533 KB

GD05 eDM (EN-GD05-EDM-USB3.0.pdf)
535 KB

  • Q. How to install an optical drive in GD05 with NT06-E?

    The TS03 supports slim optical drive to reduce the depth required in the 5.25” optical drive bay. It can increase the space for CPU cooler in the GD05. The limitations of installing NT06-E into the GD05 are as follow:

    1. Horizontal orientation of CPU cooler on the motherboard.

      The distance from CPU to motherboard edge.

    2. Vertical orientation of CPU cooler on the motherboard.

    The distance from CPU to motherboard edge.

    The above limitations apply only if graphics card is installed in the first expansion slot and with rear 80mm fans installed.
    If fans are removed, y distance decreases by 25mm
    If graphics card is installed in the second expansion slot, the x distance increases by 20mm

    Installation guide

    1. Install the NT06-E on the motherboard.

    2. Insert a slim optical drive into the TS03.

    3. Install the motherboard into the chassis.

    4. Install and secure the TS03 in the 5.25” drive bay.

    5. Connect the wires and cables to the TS03.

    6. Install a 120mm fan over the NT06-E as needed.
  • Q. USB 3.0 Cable Upgrade Guide

    1. Loosen three screws located on the back of GD05 and detach top-cover gently.

    2. Loosen four screws located on hard drive bracket and detach it gently.

    3. Loosen two screws near front I/O module and detach it gently.

    4. Install USB 3.0 front I/O module (part number: G11303260) and secure with screws.

    5. Assemble parts back in reverse order carefully. Your case is now USB3 ready.

If the answers don't solve your problem, please email to support@silverstonetek.com. Thanks!
ALL trademarks are registered to their respective owners. ©2015 SilverStone Technology Co., Ltd. All Rights Reserved.