Strider 시리즈     ST1500



■ 1500W continuous and 1600W peak power

■ 100% modular cables with cable bag

■ Efficiency 85%~88% at 20%~100% loading with 80 PLUS Silver certification

■ Class-leading eight +12V rails with 110A (Peak up to 120A)

■ 1500W continuous power output with 40°C operating temperature

■ Strict ±3% voltage regulation

■ Silent running 135mm fan with 19dBA minimum

■ Japanese main capacitors

■ Four PCI-E 8pin, eight PCI-E 6pin, and twelve SATA connectors support

■ Supports ATX 12V 2.3 & EPS 12V

■ Active PFC

   
         Reaching 1500W DC output (1600W peak), the Strider ST1500 is effectively at the limit of what an internal PC power supply can achieve in terms of wattage rating. For SilverStone, getting to this maximum power was only part of the goal for a consumer-level power supply so every desirable feature known were added to create a dream product. The list starts with unprecedented eight +12V rails with each capable of up to 25A and continues with features such as 100% modular cables, 80 PLUS Silver worthy efficiency ratings, and quietness level that matches most 500W PSUs. If there is one upgrade that will likely outlast a PC enthusiast’s interest in computing, the ST1500 may just be it.



  

비고
 


모델 번호
SST-ST1500
최대 DC 출력
1500W (피크 1600W)
전력 밀도
리터당 529W
부하범위
 
+3.3V +5V +12V1 +12V2 +12V3 +12V4 +12V5 +12V6 +12V7 +12V8 +5VSB -12V
최대(암페아)
40A 40A 25A 25A 25A 25A 25A 25A 25A 25A 6.0A 0.5A
피크(암페아)
/ / 30A 30A 30A 30A 30A 30A 30A 30A 8.0A /
최소(암페아)
0.8A 0.5A 0.1A 0.1A 0.1A 0.1A 0.1A 0.1A 0.1A 0.1A 0A 0A
범위(%)
±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±3% ±5% ±10%
라인 조절(%)
±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1%
리플(mVp-p)
50mV 50mV 120mV 120m 120m 120m 120m 120m 120m 120m 50mV 120m
Black (Lead-Free Paint)
결합형 +3.3, +5V
280W
결합형 +12V
1320W/110A (Peak 120A)
입력 전압
90V~264V
입력 주파수 범위
47Hz ~ 63Hz
PFC
Active PFC(PF>0.95 at Full Load)
효율성
85%~88% at 20%~100% loading
MTBF
100,000 hours at 25℃(at Full Load)
작동 온도
0°C ~ 40°C
보호
과전류보호
과출력 보호
과전압 보호
회로단락 보호
저전압 보호
무부하 운전 보호
커넥터
1 x 24 / 20-Pin Motherboard connector (550mm)
1 x 8 / 4-Pin EPS / ATX 12V connector (750mm)
1 x 8-Pin EPS 12V connector (750mm)
4 x 8/6-Pin PCIE connector (550mm)
4 x 6-Pin PCIE connector (550mm / 150mm)
12 x SATA connector (500mm / 250mm / 250mm)
12 x 4-Pin Peripheral connector (500mm / 250mm / 250mm)
4 x 4-Pin Floppy connector (500mm / 250mm / 250mm / 150mm)
냉각 시스템
Silent 135mm fan
폼 팩터
소음 레벨
19dBA-34dBA
치수
150 mm (W) × 86 mm (H) × 220 mm (D)
무게
4.2Kg
인증
80 PLUS Silver
기타
GPU Support list
Compatible with ATX12V v2.4
PP05-E
좀 더 작은 케이스와 시스템으로 복잡하게 엉킨 케이블을 줄입니다 추가 정보...
FT01
Performance Standard ATX tower chassis with aluminum unibody 추가 정보...
RV01
Extreme enthusiast extended ATX tower chassis 추가 정보...
TJ07
소형 폼 팩터 값에 대한 벤치마크 추가 정보...
TJ10
Flagship-level extended ATX tower chassis 추가 정보...
 
 
설명
Ver
크기
다운로드
ST1500 Manual
 v1.0 
157 KB
     
ST1500 rail distribution guide
 v1.0 
188 KB
     


A:If your computer is tripping the circuit breaker that means it is drawing too much power from one outlet. Please do the following:

  • Please make sure the computer is plugged directly into the wall outlet and do not use extension socket or other multiple outlet extension cords with the computer.
  • If the use of extension socket is necessary, avoid combined usage with other higher powered household appliances such as TV, audio amplifier, etc…
  • Contact your local electrician for information on how you can upgrade your house to accommodate higher electrical draw.

A:
The power supply has a thermistor inside designed to limit inrush current. After the power supply starts up successfully, the thermistor will automatically lower its resistance to improve working efficiency. The amount of resistance is closely related to internal power supply temperature so once the power supply heats up, the resistance will decrease dramatically.

When the power supply is turned off, the thermistor will still detect high temperature and therefore provide less resistance to inrush current compared to cold boot. Since ST1500 has very higher capacity, its inrush current difference between cold and hot boot is much greater than most power supplies.

The only solution to this limitation is to consult a local electrician and install a new breaker with higher and suitable inrush current tolerance for the ST1500.