Precision Series     PS02

■ Classic front panel styling

■ Mid-size tower chassis for all around integration

■ excellent cooling performance

■ Highly flexible drive storage options

         For SilverStone engineers, innovation is more than feature improvements; it is about improving total user experience. The Precision series PS02 is designed for users that appreciate quality computing experience. With a heritage of conservative premium tower chassis as the basis, the PS02 follows the same styling direction to achieve a modern, classic look. The up-side down power supply layout design and flexible drive storage options enable PS02 to support a wide selection of components. For those requiring a quality enclosure with great styling, the PS02 is an excellent choice.

Model No. SST-PS02B
Material High-strength plastic front panel & aluminum accent, SECC body
Motherboard ATX, Micro-ATX
Multimedia --
Drive Bay External 5.25" x 4
3.5” x 1
Internal 3.5” x 5
Cooling System Front 1 x 120mm fan slot
Rear 1 x 120mm exhaust fan
Side --
Top 1 x 120mm or 1 x 140mm fan slot
Bottom --
Internal --
Expansion Slot 7
Front I/O Port USB 2.0 x 2
Audio x 1
MIC x 1
Power Supply 1 x Optional standard PS2(ATX)
Operating system support --
Expansion Card 12.3", width restriction-6.54"
Limitation of CPU cooler 161mm
Limitation of PSU Unlimited
Net Weight 5.73kg
Dimension 200mm (W)x 438mm(H) x 483mm(D), 42.3 liters
Extra --
Support VESA Mount --

SATA III cable with non-scratch locking mechanism and 90° connector more information...
World’s thinnest and most low-profile SATA cable more information...
Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. more information...
Add FP53 to an available 5.25" drive bay for cooling a hot 3.5" hard drive. more information...
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
Equip your PS02 with FN121-BL for added lighting effect in available 120mm fan slots. more information...
120mm ultra-quiet PWM fan more information...
PS02 Manual
1,405 KB

Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.

LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. Use both hands to detach front panel gently.

2. Flip front panel over to loosen two screws near USB 2.0 front I/O module and detach it gently.

3. Install USB 3.0 front I/O module (part number: G11303260) and fasten two screws back gently.

4. Assemble parts back in reverse order carefully. Your case is now USB3 ready.