Lascala Series     LC13-E



■ Superbe panneau frontal

■ Nombreuses configurations de lecteurs possible

■ Refroidissement aux performances de nouvelle génération

■ Disposition du boîtier poproposant une grande compatibilité

         En redéfinissant une nouvelle fois l'élégance du genre, le SilverStone LC13-E peut être vu comme un look impressionnant à la fois beau et fonctionnel. Derrière cela, il y a un boîtier offrant un grand nombre d'emplacements pour les disques durs et les lecteurs optiques avec d'excellentes caractéristiques de refroidissement. Parmi les boîtiers fabriqués avec des compromis, le LC13 représente le tout premier choix pour ceux qui ont besoin de liberté pour leur PC cinédom.
 


Modèle N° SST-LC13B-E (noir)
SST-LC13S-E (argent)
SST-LC13B-E-USB3.0 (noir)
SST-LC13S-E-USB3.0 (argent)
Matériau utilisé Panneau frontal en aluminium, châssis en SECC 0.8mm
Carte mère ATX, Micro-ATX
Multimédia --
Baies Externe 5.25" x 2
3.5" x 2
Interne 3.5" x 4
Systeme de refroidissement facade 1 emplacement pour ventilateur de 92mm ou 80mm
Arrière 2 ventilateurs de 80mm en extraction, 2050 tr/min, 21dBA
Côté 1 emplacement pour ventilateur de 80mm fan slot & aérations pour l'alimentation
Dessus --
Le fond --
Interne --
Emplacement d’extension 7
Ports E/S en façade USB 2.0 x 2 (SST-LC13B-E, SST-LC13S-E only)
USB 3.0 x 2 (SST-LC13B-E-USB3.0,SST-LC13S-E-USB3.0 only)
IEEE1394 x 1
Audio x 1
MIC x 1
Alimentation PS2 standard en option (ATX)
Operating system support --
Carte graphique Support graphic cards up to 8.75” (up to 14” with 1 of 2 HDD cages removed), width restriction-5.51
Limitation du refroidisseur de l'unité centrale 135mm
Limitation du bloc d'alimentation Unlimited
Poids net 7.13kg
Dimensions 430mm (L) x 171.5mm (H) x 439.6mm (P), 32.4 liters
Supplémentaire --
Support VESA Mount --


CP07
SATA II cable are perfect for any regular SATA devices. more information...
CP08
SATA III cable with non-scratch locking mechanism and 90° connector more information...
CP11
World’s thinnest and most low-profile SATA cable more information...
FP35
Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. more information...
FP53
Add FP53 to an available 5.25" drive bay for cooling a hot 3.5" hard drive. more information...
SDP08
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
FN81
Add FN81 for additional cooling in available 80mm fan slots more information...
FQ81
800mm ultra-quiet PWM fan more information...
NT01-PRO
CPU cooler designed for HTPC. more information...
 
 
Describe
Ver
Size
Téléchargement
LC13-E Manual
v1.0
4,527 KB
     




Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. Loosen four screws located on the back of LC13-E and detach top-panel gently.
     

2. Loosen four screws on the center brace and detach it gently.
     
     

3. Loosen four screws on the hard drive cage and detach it gently.
     

4. Loosen two screws on the 5.25” device bracket and detach it gently.
     

5. Loosen four screws on the FDD bracket and detach it gently.
     
     

6. Loosen eight screws behind the front panel and detach front panel gently.
     

7. Loosen two screws near front I/O module and detach it gently.
     

8. Install USB 3.0 front I/O module (part number: G11303590) and secure with two screws.
     

9. Secure wire with cable tie and assemble parts back in reverse order carefully.Your case is now USB3 ready.