Lascala Series     LC13-E



■ Magnificent front panel design

■ Numerous drive configurations possible

■ Next generation cooling performance

■ Highly compatible chassis layout

         Redefining the styling direction of a genre once again, SiverStone's LC13-E can be seen as an impressive fascia that is both beautiful and purposeful. Behind it, is a chassis offering an extensive array of hard drive / optical drive configuration and excellent cooling characteristic. Among cases that are built on compromises, the LC13-E is the first choice for those who need the most freedom with their HTPC.
 


Model No. SST-LC13B-E (black)
SST-LC13S-E (silver)
SST-LC13B-E-USB3.0 (black)
SST-LC13S-E-USB3.0 (silver)
Material Aluminum front panel, 0.8mm SECC body
Motherboard ATX, Micro-ATX
Multimedia --
Drive Bay External 5.25" x 2
3.5" x 2
Internal 3.5" x 4
Cooling System Front 1 x 92mm or 80mm fan slots
Rear 2 x 80mm exhaust, 2050rpm, 21dBA
Side 1 x 80mm fan slot & PSU vents
Top --
Bottom --
Internal --
Expansion Slot 7
Front I/O Port USB 2.0 x 2 (SST-LC13B-E, SST-LC13S-E only)
USB 3.0 x 2 (SST-LC13B-E-USB3.0,SST-LC13S-E-USB3.0 only)
IEEE1394 x 1
Audio x 1
MIC x 1
Power Supply Optional standard PS2(ATX)
Operating system support --
Expansion Card Support graphic cards up to 8.75” (up to 14” with 1 of 2 HDD cages removed), width restriction-5.51
Limitation of CPU cooler 135mm
Limitation of PSU Unlimited
Net Weight 7.13kg
Dimension 430mm (W) x 171.5mm (H) x 439.6mm (D), 32.4 liters
Extra --
Support VESA Mount --


CP07
SATA II cable are perfect for any regular SATA devices. more information...
CP08
SATA III cable with non-scratch locking mechanism and 90° connector more information...
CP11
World’s thinnest and most low-profile SATA cable more information...
FP35
Add FP35 to an available 3.5" drive bay to enable eSATA and card reader capability. more information...
FP53
Add FP53 to an available 5.25" drive bay for cooling a hot 3.5" hard drive. more information...
SDP08
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
FN81
Add FN81 for additional cooling in available 80mm fan slots more information...
FQ81
800mm ultra-quiet PWM fan more information...
NT01-PRO
CPU cooler designed for HTPC. more information...
 
 
Describe
Ver
Size
Download
LC13-E Manual
v1.0
4,527 KB
     


LC13-E eDM (EN-LC13-E-EDM-USB3.0.jpg)
 
153 KB



Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.



LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. Loosen four screws located on the back of LC13-E and detach top-panel gently.
     

2. Loosen four screws on the center brace and detach it gently.
     
     

3. Loosen four screws on the hard drive cage and detach it gently.
     

4. Loosen two screws on the 5.25” device bracket and detach it gently.
     

5. Loosen four screws on the FDD bracket and detach it gently.
     
     

6. Loosen eight screws behind the front panel and detach front panel gently.
     

7. Loosen two screws near front I/O module and detach it gently.
     

8. Install USB 3.0 front I/O module (part number: G11303590) and secure with two screws.
     

9. Secure wire with cable tie and assemble parts back in reverse order carefully.Your case is now USB3 ready.