Sugo Series     SG01-F

■ Steel structure for silent builds

■ Cleanly styled aluminum front panel

■ Enhanced cooling layout for high performance

■ Dual 5.25” and 3.5” drive bays

■ Micro ATX motherboard & ATX PSU compatible

■ Extended-length expansion cards support

         The SG01-F takes another step forward in both performance and capabilities over the original Sugo’s aluminum chassis, the SG01. With the case now capable of handling even more powerful graphics cards than ever before, the case still has the smaller dimension of its predecessor intact. The now classic Sugo styling and proportions continue to stand out from lesser SFF designs while its tried and true chassis layout still impresses with standard form factor accepting capacity. Built based on a brand new steel structure, the SG01-F is will again become the standard for builders looking to build quality SFF computers.


SG01-F outfitted with 14.5" long ATI Radeon HD 2900XTX 1GB GDDR4 (OEM version)

Graphic card length reference:
  1. AMD Radeon HD 5970 - 12.2"
  2. AMD Radeon HD 6990 - 12"
  3. AMD Radeon HD 6970 - 11"
  4. AMD Radeon HD 6950 - 11"
  5. AMD Radeon HD 5870 - 11"
  6. AMD Radeon HD 6870 - 10.5"
  7. NVIDIA GeForce GTX580 - 10.5"
  8. NVIDIA GeForce GTX480 - 10.5"
  9. AMD Radeon HD 5850 - 9.5"
  10. NVIDIA GeForce GTX470 - 9.5"
  11. AMD Radeon HD 6850 - 9"
If an expansion card longer than 9.6” to be installed at the first slot is needed, please refer to the manual.

Model No. SST-SG01B-F (black)
SST-SG01S-F (silver)
SST-SG01B-F-USB3.0 (black)
SST-SG01S-F-USB3.0 (silver)
Material Aluminum front panel, SECC body
Motherboard Micro-ATX
Multimedia --
Drive Bay External 5.25” x 2
Internal 3.5” x 2
Cooling System Front --
Rear 1 x 80mm exhaust fan 2050rpm,Optional cross-flow fan
Side 1 x 80mm intake fan 2050rpm Option 80mm or 70mm in thickness of 25mm, 15mm or 10mm
Top 1 x 80mm fan slot
Bottom --
Internal --
Expansion Slot 4
Front I/O Port USB 2.0 x 4 (SST-SG01B-F, SST-SG01S-F only)
USB 2.0 x 2 + USB 3.0 x 2 (SST-SG01B-F-USB3.0, SST-SG01S-F-USB3.0 only)
IEEE 1394 x 1
Audio x 1
MIC x 1
Power Supply Optional standard PS2(ATX)
Operating system support --
Expansion Card Full size long cards capable (14.5”)*, width restriction-4.46"
Limitation of CPU cooler 82mm
Limitation of PSU PSU + optical drive/5.25” device = 370mm
Net Weight 4.9 kg
Dimension 263 mm (W) x 212 mm (H) x 393 mm (D), 21.9 liters
Extra --
Support VESA Mount --

* CPU cooler cannot exceed 82mm in height

Get a Sugo Pack to conveniently take your SG01-F anywhere you go. more information...
Short cable set reduces cable clutter in smaller cases & systems. more information...
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
80mm ultra-quiet PWM fan more information...
CPU cooler designed for SFF. more information...
SG01-F Manual
7,268 KB

SG01-F eDM (EN-SG01-F-100dpi.jpg)
292 KB

Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.

LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.