Sugo Series     SG02-F

■ Steel structure for silent builds

■ Modern and cleanly styled SFF chassis

■ Enhanced cooling layout for high performance

■ Dual 5.25” and 3.5” drive bays

■ Micro ATX motherboard & ATX PSU compatible

■ Extended-length expansion cards support

         The SG02F, as the successor to the SG02 is an evolutionary step forward in both performance and the capabilities over the original Sugo chassis, the SG01. With the case now capable of handling even more powerful graphics cards than ever before, the SilverStone engineers were still able to keep the smaller dimension in tact. Although SG02F’s front panel design is unchanged from its predecessor, its styling and function continues to stand out from ordinary SFF designs. The same can also be said of its tried and true chassis layout, which is still capable of accepting larger ATX power supply or optical drives than other SFF cases available. Built based on a brand new steel structure, the SG02F is sure to please potential builders looking for primarily silent applications.


SG02-F outfitted with 14.5" long ATI Radeon HD 2900XTX 1GB GDDR4 (OEM version)

Graphic card length reference:
  1. AMD Radeon HD 5970 - 12.2"
  2. AMD Radeon HD 6990 - 12"
  3. AMD Radeon HD 6970 - 11"
  4. AMD Radeon HD 6950 - 11"
  5. AMD Radeon HD 5870 - 11"
  6. AMD Radeon HD 6870 - 10.5"
  7. NVIDIA GeForce GTX580 - 10.5"
  8. NVIDIA GeForce GTX480 - 10.5"
  9. AMD Radeon HD 5850 - 9.5"
  10. NVIDIA GeForce GTX470 - 9.5"
  11. AMD Radeon HD 6850 - 9"
If an expansion card is longer than 9.6” and it needs to be installed in the first slot, please refer to the manual for installation instructions.

Model No. SST-SG02B-F (black)
SST-SG02W-F (white)
SST-SG02B-F-USB3.0 (black)
SST-SG02W-F-USB3.0 (white)
Material ABS & acrylic front panel, SECC body
Motherboard Micro-ATX
Multimedia --
Drive Bay External 5.25” x 2
3.5" converter x 1
Internal 3.5” x 2
Cooling System Front --
Rear 1 x 80mm fan slot, Optional cross-flow fan
Side 1 x 80mm intake fan 2050rpm Option 80mm or 70mm in thickness of 25mm, 15mm or 10mm
Top 1 x 80mm fan slot
Bottom --
Internal --
Expansion Slot 4
Front I/O Port USB 2.0 x 2 (SST-SG02B-F, SST-SG02W-F only)
USB 3.0 x 2 (SST-SG02B-F-USB3.0, SST-SG02W-F-USB3.0 only)
IEEE 1394 x 1
Audio x 1
MIC x 1
Power Supply Optional standard PS2(ATX)
Operating system support --
Expansion Card Full size long cards capable (14.5”)*, width restriction-4.46"
Limitation of CPU cooler 82mm
Limitation of PSU PSU + optical drive/5.25” device = 370mm
Net Weight 4.1 kg
Dimension 270 mm (W) x 212 mm (H) x 393 mm (D), 22.5 liters
Extra --
Support VESA Mount --

* CPU cooler cannot exceed 82mm in height

Get a Sugo Pack to conveniently take your SG02-F anywhere you go. more information...
SATA III cable with non-scratch locking mechanism and 90° connector more information...
World’s thinnest and most low-profile SATA cable more information...
Short cable set reduces cable clutter in smaller cases & systems. more information...
Use SDP08 to convert an available 3.5" drive bay into two 2.5" drive bays. more information...
80mm ultra-quiet PWM fan more information...
CPU cooler designed for SFF. more information...
SG02-F manual
9,502 KB

SG02-F eDM (EN-SG02F-EDM.pdf)
390 KB

Power switch and reset switch installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition. Power switch and reset switch have no polarity, so they can be connected in any orientation.

LED connector installation guide:
Please refer to the motherboard manuals for the motherboard’s “Front Panel Connector” or “System Panel Connector” pin definition.
White colored wires are negative while other colored wires are positive.
Power LED connector is designed as separate pins for compatibility with different motherboard specifications.

1. Loosen three screws located on the back of SG02-F and detach top-panel gently.

2. Loosen five screws on the fan bracket (two on top, two on rear and one on the side) and detach it gently.

3. Loosen four hard drive cage screws on the bottom of SG02-F.

4. Loosen four screws behind the front panel and detach front panel gently.
     (There are one screw hidden behind hard drive cage, you need to move hard drive cage to the right first, then use screwdriver to loosen the hidden screw. )

5. Loosen two screws near front I/O module and detach it gently.

6. Install USB 3.0 front I/O module (part number: G11303590) and secure with two screws.
     Assemble parts back in reverse order carefully. Your case is now USB3 ready.